News:


  • May 13, 2024, 12:23:07 PM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: Spinners  (Read 517 times)

Offline Ron Vargo

  • 21 supporter
  • Trade Count: (0)
  • New Pilot
  • *
  • Posts: 24
Spinners
« on: March 17, 2020, 07:15:43 AM »
Hey guys,   I’m looking for a couple good sources for electric spinners. I have found tru turn for aluminum but carbon fiber I’m having trouble . I see hobby king has some 2” carbon but they always seem to be out. Rsm say they really don’t carry them because they don’t sell. Any suggestions would be appreciated.  Thx

Logged

Offline Larry Wong

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 957
Re: Spinners
« Reply #1 on: March 17, 2020, 08:45:29 AM »
Try eBay or Amozon
Logged
Larry

Believing is the Beginning to greatness <><

Offline Steve Helmick

  • AMA Member and supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 9950
Re: Spinners
« Reply #2 on: March 17, 2020, 10:47:10 AM »
Finding a source of spinners for greasers is difficult. Spinners for eLectrics are everywhere. Try Horizon. If the OP insists on CF, then Hobby King is your best bet. But from what I hear, they say they have something, but it ends up shipping from China and they nail you for the shipping cost, so be wary of that. Amazon or eBay sounds appealing by comparison. Yatsenko might be another source, since they are now dabbling with electrons.  D>K Steve
Logged
"The United States has become a place where professional athletes and entertainers are mistaken for people of importance." - Robert Heinlein

In 1944 18-20 year old's stormed beaches, and parachuted behind enemy lines to almost certain death.  In 2015 18-20 year old's need safe zones so people don't hurt their feelings.

Offline Steve Dwyer

  • 2020 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 930
Re: Spinners
« Reply #3 on: March 17, 2020, 11:28:36 AM »
Ron,

Check out F3A Unlimited, there appears to be a good selection.

Steve
Logged

Online Howard Rush

  • 22 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 7813
Re: Spinners
« Reply #4 on: March 17, 2020, 02:20:01 PM »
What prop?
Logged
The Jive Combat Team
Making combat and stunt great again

Online Dave_Trible

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 6174
Re: Spinners
« Reply #5 on: March 17, 2020, 05:05:20 PM »
I've bought quite a few on Ebay from ZY hobby-China.  About anything you could want, cheap and free shipping.  I've purchased two blade, three blade, four blade and no cut outs at all.  They mostly now have aluminum backplates but all those I bought have carbon backplates.  2" complete .6 ounces.

Dave
Logged
AMA 20934
FAA Certificate FA3ATY4T94

Offline fred cesquim

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 856
    • Fred Cesquim Aeromodelos
Re: Spinners
« Reply #6 on: March 18, 2020, 04:56:08 AM »
try https://www.zyhobby.com/c/carbon-fiber-spinner-0419
i always by from them and loved quality, although you must balance for electric power
this carbon one was bought blank cut for propellers so you can cut to suit
Logged

Offline Ron Vargo

  • 21 supporter
  • Trade Count: (0)
  • New Pilot
  • *
  • Posts: 24
Re: Spinners
« Reply #7 on: March 18, 2020, 04:31:30 PM »
Thx to all. Thx Fred  I’m going to order from there
Logged

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags:
 


Advertise Here