News:



  • July 09, 2025, 11:48:54 AM

Login with username, password and session length

Author Topic: Tom Morris control linkage hardware!  (Read 6157 times)

Offline Avaiojet

  • 22 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 7468
  • Just here for the fun of it also.
Tom Morris control linkage hardware!
« on: December 18, 2012, 04:46:41 PM »

I admire those individuals that take the effort to do something correct the first time.

So, here's a recommendation if you need linkage hardware or custom linkage hardware.

Tom Morris!  H^^

Tom gets it right the first time.

From a simple drawing, or in my case, just a conversation over the phone.

The linkage hardware for The LOSER, Tom nailed it!

Same with my last order for custom linkage hardware for The International, Tom nailed it there also!

Thank you Tom Morris!

Charles



Trump Derangement Syndrome. TDS. 
Avaiojet Derangement Syndrome. ADS.
Amazing how ignorance can get in the way of the learning process.
If you're Trolled, you know you're doing something right.  Alpha Mike Foxtrot. "No one has ever made a difference by being like everyone else."  Marcus Cordeiro, The "Mark of Excellence," you will not be forgotten. "No amount of evidence will ever persuade an idiot."- Mark Twain. I look at the Forum as a place to contribute and make friends, some view it as a Realm where they could be King.   Proverb 11.9  "With his mouth the Godless destroys his neighbor..."  "Perhaps the greatest challenge in modeling is to build a competitive control line stunter that looks like a real airplane." David McCellan, 1980.

Offline Steve Fitton

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2278
Re: Tom Morris control linkage hardware!
« Reply #1 on: December 18, 2012, 06:43:07 PM »
Whoah, I had no idea Morris made control systems!
Steve

Offline Mike Keville

  • AMA Member
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2319
Re: Tom Morris control linkage hardware!
« Reply #2 on: December 18, 2012, 06:45:35 PM »
No surprise there.  Every product offered by Tom Morris is First Class -- in addition to his being a genuine First Class gentleman himself.  Tom is one of the "Good Guys".
FORMER member, "Academy of Multi-rotors & ARFs".

Offline Dick Pacini

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1650
Re: Tom Morris control linkage hardware!
« Reply #3 on: December 18, 2012, 07:52:11 PM »
Whoah, I had no idea Morris made control systems!

Many of his products were sold through CLC.  They are top notch!  I am glad he is selling direct now.
AMA 62221

Once, twice, three times a lady.  Four times and she does it for a living.  "You want me on that wall.  You need me on that wall."

Mike Griffin

  • Guest
  • Trade Count: (0)
Re: Tom Morris control linkage hardware!
« Reply #4 on: December 18, 2012, 09:39:48 PM »
Tom called me today and told me about this and then sent me this picture.  33 airplanes being built simultaneously.   Think the guy is good or what?

Mike

Offline Clint Ormosen

  • 2019 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2632
Re: Tom Morris control linkage hardware!
« Reply #5 on: December 19, 2012, 12:51:20 AM »
Tom called me today and told me about this and then sent me this picture.  33 airplanes being built simultaneously.   Think the guy is good or what?

Mike

Hmmm....... I only count 32. What a slacker! ;D

-Clint-

AMA 559593
Finding new and innovated ways to screw up the pattern since 1993

ChrisSarnowski

  • Guest
  • Trade Count: (0)
Re: Tom Morris control linkage hardware!
« Reply #6 on: December 19, 2012, 05:20:31 AM »
Nice work, and look at how clean the floor is. Tom must have a fleet of those robot vacuums running around the shop!!

-Chris

Offline john e. holliday

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 22992
Re: Tom Morris control linkage hardware!
« Reply #7 on: December 19, 2012, 08:58:27 AM »
Ditto on owing Tom Morris a big thanks.  I remember meeting him for the first time in Lubbock TX NATS.
John E. "DOC" Holliday
10421 West 56th Terrace
Shawnee, KANSAS  66203
AMA 23530  Have fun as I have and I am still breaking a record.

Online Dan McEntee

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 7534
Re: Tom Morris control linkage hardware!
« Reply #8 on: December 19, 2012, 10:07:18 AM »
  Posted somewhere is a video of Tom's "marginally adequate" work shop. Very well thought out and executed. The cabinets are made from maple that was the old gym floor at West Point, I think. How's THAT for recycling! He has dust collectors and vacuum ducts all over the place, including floor sweep ducts with flip cover plates over them, just sweep the mess that way right into the opening and GONE!. I don't think he has a dust pan! He's building 33 at a time and I can't get one finished!!! I wish I had some of his discipline!
   Type at you later,
   Dan McEntee
AMA 28784
EAA  1038824
AMA 480405 (American Motorcyclist Association)

Offline James Mills

  • AMA Member and supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1305
  • Welcome to the Stunt Hanger.
Re: Tom Morris control linkage hardware!
« Reply #9 on: December 19, 2012, 10:10:25 AM »
  Posted somewhere is a video of Tom's "marginally adequate" work shop. Very well thought out and executed. The cabinets are made from maple that was the old gym floor at West Point, I think. How's THAT for recycling! He has dust collectors and vacuum ducts all over the place, including floor sweep ducts with flip cover plates over them, just sweep the mess that way right into the opening and GONE!. I don't think he has a dust pan! He's building 33 at a time and I can't get one finished!!! I wish I had some of his discipline!
   Type at you later,
   Dan McEntee
Bob Hunt had an interview with Tom and a tour of his shop on one of his DVD's  Very cool shop.

James
AMA 491167

Offline Randy Powell

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 10476
  • TreeTop Flyer
Re: Tom Morris control linkage hardware!
« Reply #10 on: December 19, 2012, 02:08:41 PM »
So, does someone have Tom's site to order or is it phone only?
Member in good standing of P.I.S.T
(Politically Incorrect Stunt Team)
AMA 67711
 Randy Powell

Offline Avaiojet

  • 22 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 7468
  • Just here for the fun of it also.
Re: Tom Morris control linkage hardware!
« Reply #11 on: December 19, 2012, 02:39:29 PM »
So, does someone have Tom's site to order or is it phone only?

Randy,
 
I don't believe Tom has a PC?  I'll PM his phone number.

Charles
Trump Derangement Syndrome. TDS. 
Avaiojet Derangement Syndrome. ADS.
Amazing how ignorance can get in the way of the learning process.
If you're Trolled, you know you're doing something right.  Alpha Mike Foxtrot. "No one has ever made a difference by being like everyone else."  Marcus Cordeiro, The "Mark of Excellence," you will not be forgotten. "No amount of evidence will ever persuade an idiot."- Mark Twain. I look at the Forum as a place to contribute and make friends, some view it as a Realm where they could be King.   Proverb 11.9  "With his mouth the Godless destroys his neighbor..."  "Perhaps the greatest challenge in modeling is to build a competitive control line stunter that looks like a real airplane." David McCellan, 1980.

Offline Lynn Weedman

  • x47weed (Lynn Weedman)
  • Trade Count: (0)
  • Commander
  • ****
  • Posts: 200
Re: Tom Morris control linkage hardware!
« Reply #12 on: December 19, 2012, 04:03:44 PM »
Tom's controls are in all my stuntships.
best bang for your buck and works smoooooth tooooo!!!!! y1

Lynn Weedman
Lynn Weedman

Offline Dick Pacini

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1650
Re: Tom Morris control linkage hardware!
« Reply #13 on: December 19, 2012, 04:48:12 PM »
I emailed him recently and requested a catalog.  The PDF is below:

AMA 62221

Once, twice, three times a lady.  Four times and she does it for a living.  "You want me on that wall.  You need me on that wall."

Offline Randy Powell

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 10476
  • TreeTop Flyer
Re: Tom Morris control linkage hardware!
« Reply #14 on: December 19, 2012, 05:00:41 PM »
That's helpful. Thanks, Dick.

And thanks to Mike for the call.
Member in good standing of P.I.S.T
(Politically Incorrect Stunt Team)
AMA 67711
 Randy Powell

Mike Griffin

  • Guest
  • Trade Count: (0)
Re: Tom Morris control linkage hardware!
« Reply #15 on: December 19, 2012, 05:06:47 PM »
Your welcome Randy


Advertise Here
Tags: