stunthanger.com
General control line discussion => Open Forum => Topic started by: Avaiojet on December 18, 2012, 04:46:41 PM
-
I admire those individuals that take the effort to do something correct the first time.
So, here's a recommendation if you need linkage hardware or custom linkage hardware.
Tom Morris! H^^
Tom gets it right the first time.
From a simple drawing, or in my case, just a conversation over the phone.
The linkage hardware for The LOSER, Tom nailed it!
Same with my last order for custom linkage hardware for The International, Tom nailed it there also!
Thank you Tom Morris!
Charles
-
Whoah, I had no idea Morris made control systems!
-
No surprise there. Every product offered by Tom Morris is First Class -- in addition to his being a genuine First Class gentleman himself. Tom is one of the "Good Guys".
-
Whoah, I had no idea Morris made control systems!
Many of his products were sold through CLC. They are top notch! I am glad he is selling direct now.
-
Tom called me today and told me about this and then sent me this picture. 33 airplanes being built simultaneously. Think the guy is good or what?
Mike
-
Tom called me today and told me about this and then sent me this picture. 33 airplanes being built simultaneously. Think the guy is good or what?
Mike
Hmmm....... I only count 32. What a slacker! ;D
-
Nice work, and look at how clean the floor is. Tom must have a fleet of those robot vacuums running around the shop!!
-Chris
-
Ditto on owing Tom Morris a big thanks. I remember meeting him for the first time in Lubbock TX NATS.
-
Posted somewhere is a video of Tom's "marginally adequate" work shop. Very well thought out and executed. The cabinets are made from maple that was the old gym floor at West Point, I think. How's THAT for recycling! He has dust collectors and vacuum ducts all over the place, including floor sweep ducts with flip cover plates over them, just sweep the mess that way right into the opening and GONE!. I don't think he has a dust pan! He's building 33 at a time and I can't get one finished!!! I wish I had some of his discipline!
Type at you later,
Dan McEntee
-
Posted somewhere is a video of Tom's "marginally adequate" work shop. Very well thought out and executed. The cabinets are made from maple that was the old gym floor at West Point, I think. How's THAT for recycling! He has dust collectors and vacuum ducts all over the place, including floor sweep ducts with flip cover plates over them, just sweep the mess that way right into the opening and GONE!. I don't think he has a dust pan! He's building 33 at a time and I can't get one finished!!! I wish I had some of his discipline!
Type at you later,
Dan McEntee
Bob Hunt had an interview with Tom and a tour of his shop on one of his DVD's Very cool shop.
James
-
So, does someone have Tom's site to order or is it phone only?
-
So, does someone have Tom's site to order or is it phone only?
Randy,
I don't believe Tom has a PC? I'll PM his phone number.
Charles
-
Tom's controls are in all my stuntships.
best bang for your buck and works smoooooth tooooo!!!!! y1
Lynn Weedman
-
I emailed him recently and requested a catalog. The PDF is below:
-
That's helpful. Thanks, Dick.
And thanks to Mike for the call.
-
Your welcome Randy