News:


  • April 28, 2024, 10:21:06 AM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: rojett 61  (Read 2361 times)

Offline Steve Bakac

  • Trade Count: (0)
  • Lieutenant
  • ***
  • Posts: 81
rojett 61
« on: March 21, 2016, 02:50:34 AM »
Hi all
        I'm thinking of purchasing  a Rojett 61 now do I ask for a Brett Buck 61 ready to go or do I have to have it modified by someone else .Also will to Rojett pipes work ok with it or go with one of Randy's
   Cheers Steve
Logged

Offline Motorman

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 3260
Re: rojett 61
« Reply #1 on: March 21, 2016, 07:25:49 AM »
What mods does it need?

MM
Logged

Online Dave_Trible

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 6155
Re: rojett 61
« Reply #2 on: March 21, 2016, 08:00:34 AM »
The engine is superb as you get it and needs nothing.  I do use a .205 Venturi over the stock .180 but that's a preference.  Either pipe works fine.  I could be wrong but I think there was a running change on port timing a few years ago which may be the Brett version but I have both the oldest and newest versions and find very little difference though I think the older one is a bit stronger.  Just order the stock BSERE.

Dave

Logged
AMA 20934
FAA Certificate FA3ATY4T94

Offline Brett Buck

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 13741
Re: rojett 61
« Reply #3 on: March 21, 2016, 09:23:36 AM »
Quote from: Dave_Trible on March 21, 2016, 08:00:34 AM
The engine is superb as you get it and needs nothing.  I do use a .205 Venturi over the stock .180 but that's a preference.  Either pipe works fine.  I could be wrong but I think there was a running change on port timing a few years ago which may be the Brett version but I have both the oldest and newest versions and find very little difference though I think the older one is a bit stronger.  Just order the stock BSERE.


  Order the "Brett Version" just to be sure.

    Brett
Logged

Offline Brett Buck

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 13741
Re: rojett 61
« Reply #4 on: March 21, 2016, 09:26:39 AM »
Quote from: Steve Bakac on March 21, 2016, 02:50:34 AM
Hi all
        I'm thinking of purchasing  a Rojett 61 now do I ask for a Brett Buck 61 ready to go or do I have to have it modified by someone else .Also will to Rojett pipes work ok with it or go with one of Randy's
   Cheers Steve

  DO NOT, repeat, DO NOT have the engine modified by someone else. Buy it directly from Dub Jett and ask for RO-Jett 61 BSE "Brett Version". Then just run it.

   I use the Randy/Billy 50-61 "slimline" pipe from the early '00's. Ask Randy for the nearest equivalent, but it must have the largest exhaust outlet.


    Brett
Logged

Offline Motorman

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 3260
Re: rojett 61
« Reply #5 on: March 21, 2016, 09:39:38 AM »
Does the 65 come in Brett version?
Logged

Offline Brett Buck

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 13741
Re: rojett 61
« Reply #6 on: March 21, 2016, 09:42:42 AM »
Quote from: Motorman on March 21, 2016, 09:39:38 AM
Does the 65 come in Brett version?

   Get the 61, as noted.

      Brett
Logged

Offline Balsa Butcher

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2357
  • High Desert Flier
Re: rojett 61
« Reply #7 on: March 21, 2016, 11:13:26 AM »
As has been reported and discussed previously; the 65 is no longer in production, 61 does just fine... 8)
Logged
Pete Cunha
Sacramento CA.
AMA 57499

Offline Gerald Arana

  • 23 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1535
Re: rojett 61
« Reply #8 on: March 21, 2016, 01:13:53 PM »
Quote from: Steve Bakac on March 21, 2016, 02:50:34 AM
Hi all
        I'm thinking of purchasing  a Rojett 61 now do I ask for a Brett Buck 61 ready to go or do I have to have it modified by someone else .Also will to Rojett pipes work ok with it or go with one of Randy's
   Cheers Steve

If the 61 isn't enough poop for you, I suggest you install a "Buick V-8"  LL~ LL~ LL~ LL~ LL~ LL~ LL~

That ought to be enough power!  LL~

Jerry
Logged

Offline Steve Bakac

  • Trade Count: (0)
  • Lieutenant
  • ***
  • Posts: 81
Re: rojett 61
« Reply #9 on: March 21, 2016, 02:10:06 PM »
Thank you guys for all the input I understand what I need to order now
 Cheers Steve
Logged

Offline Paul Allen

  • 2014 Supporters
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 392
Re: rojett 61
« Reply #10 on: March 21, 2016, 02:59:31 PM »
 Steve
        I guess you are not building the Vector!
Paul
Logged

Offline Steve Bakac

  • Trade Count: (0)
  • Lieutenant
  • ***
  • Posts: 81
Re: rojett 61
« Reply #11 on: March 21, 2016, 06:12:00 PM »
Hi Paul
   Well you can never have to much horse power up front haha
Narrr its for the other project thats coming i told you about chupim60
 cheers Steve
Logged

Offline Richard Field

  • 2018 Supporter
  • Trade Count: (0)
  • Ensign
  • *
  • Posts: 47
Re: rojett 61
« Reply #12 on: March 22, 2016, 03:44:53 AM »
Hi Steve,

Good to see you've also put yourself down for the Chupim60. Hopefully we can have 2 flying in NSW without too much delay!

I've just scored a NOS (2012) Ro-Jett 67 with Header/Pipe set that may yet find it's way into my Chupim60. Let me know if you want any info on the 67 - I'll be measuring it up tonight.

Cheers,
Richard
Logged

Offline dale gleason

  • 23 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 842
Re: rojett 61
« Reply #13 on: March 22, 2016, 12:04:58 PM »
Weigh that pipe...you will be pleasantly surprised.
« Last Edit: March 22, 2016, 03:03:41 PM by dale gleason »
Logged

Offline Richard Field

  • 2018 Supporter
  • Trade Count: (0)
  • Ensign
  • *
  • Posts: 47
Re: rojett 61
« Reply #14 on: March 22, 2016, 11:13:25 PM »
The pipe weighed a mere 1.35oz, only marginally more than the bubble wrap it came in..

As the tape label shows it's the pipe for a 67-76, so a 61 pipe could be less again?
Logged

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags:
 


Advertise Here