I Need Help

[john e. holliday]

No not that kind of help.  I am beyond that.  It is I found this Fox .46 RC in my stash.  It has the bolt on carburator.  I need the U/C body and needle assembly.  Yes I have tried Fox already.  They need the engine.  The bolt pattern is 1 1/16 inches center to center on the bolt holes.  If in wrong location administrator has my permission to move this.  Thanks.

[Garf]

I just got one for the Fox 25R/C from this person.

shtter_jwn5327uhzg@members.ebay.com

[Bill Gruby]

 I don't know the Fox part # Doc but ask them for the upright venturi for the Fox .45 BB, it will fit. It fits everything including the Hawk .60. It also uses the NVA from a Fox .36 BB Combat Special. Hope this helps ya out.
 
 "Billy G"  

[john e. holliday]

Thanks Bill, will try again.   

[Marvin Denny]

  Doc, are you coming to our contest   Aug 7 & 8 ?  You might talk the Silver Foxx out of one.  Lew usually carries a goodly supply of  Fox parts.

  Bigiron

[Andrew Tinsley]

Hi Folks,
  I am in the same boat as Doc! I have a similar Fox 45 (?) and a Fox Hawk. If you can tell me what I need, I can pester Fox as well as Doc!

Regards,

Andrew.

[Jim Kraft]

Hey Doc; If I remeber right, someone had a whole box of those at Wichita's contest a few years ago. Might have been Jim Lee. Or as Marvin says, Lew probably has one.

[Bill Gruby]

Hi Folks,
  I am in the same boat as Doc! I have a similar Fox 45 (?) and a Fox Hawk. If you can tell me what I need, I can pester Fox as well as Doc!

Regards,

Andrew.

 Andrew;

   Please read my post to "Doc" above. The venturi and NVA for the .45 and the Hawk .60 are the same.

 "Billy G"