stunthanger.com

General control line discussion => Open Forum => Topic started by: john e. holliday on July 31, 2010, 06:49:33 PM

Title: I Need Help
Post by: john e. holliday on July 31, 2010, 06:49:33 PM

No not that kind of help.  I am beyond that.  It is I found this Fox .46 RC in my stash.  It has the bolt on carburator.  I need the U/C body and needle assembly.  Yes I have tried Fox already.  They need the engine.  The bolt pattern is 1 1/16 inches center to center on the bolt holes.  If in wrong location administrator has my permission to move this.  Thanks. H^^

Title: Re: I Need Help
Post by: Garf on July 31, 2010, 09:02:32 PM

I just got one for the Fox 25R/C from this person.

shtter_jwn5327uhzg@members.ebay.com

Title: Re: I Need Help
Post by: Bill Gruby on August 01, 2010, 06:05:50 AM

 I don't know the Fox part # Doc but ask them for the upright venturi for the Fox .45 BB, it will fit. It fits everything including the Hawk .60. It also uses the NVA from a Fox .36 BB Combat Special. Hope this helps ya out.
 
 "Billy G"   H^^

Title: Re: I Need Help
Post by: john e. holliday on August 01, 2010, 06:50:20 AM

Thanks Bill, will try again.   H^^

Title: Re: I Need Help
Post by: Marvin Denny on August 01, 2010, 09:14:29 AM

  Doc, are you coming to our contest   Aug 7 & 8 ?  You might talk the Silver Foxx out of one.  Lew usually carries a goodly supply of  Fox parts.

  Bigiron

Title: Re: I Need Help
Post by: Andrew Tinsley on August 01, 2010, 12:34:48 PM

Hi Folks,
  I am in the same boat as Doc! I have a similar Fox 45 (?) and a Fox Hawk. If you can tell me what I need, I can pester Fox as well as Doc!

Regards,

Andrew.

Title: Re: I Need Help
Post by: Jim Kraft on August 01, 2010, 12:51:40 PM

Hey Doc; If I remeber right, someone had a whole box of those at Wichita's contest a few years ago. Might have been Jim Lee. Or as Marvin says, Lew probably has one.

Title: Re: I Need Help
Post by: Bill Gruby on August 02, 2010, 01:54:47 AM

Quote from: Andrew Tinsley on August 01, 2010, 12:34:48 PM

Hi Folks,
  I am in the same boat as Doc! I have a similar Fox 45 (?) and a Fox Hawk. If you can tell me what I need, I can pester Fox as well as Doc!

Regards,

Andrew.

 Andrew;

   Please read my post to "Doc" above. The venturi and NVA for the .45 and the Hawk .60 are the same.

 "Billy G"  H^^