News:


  • May 23, 2024, 11:27:11 AM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: For Steve Pagano - Another take apart vector  (Read 1294 times)

Offline Wynn Robins

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1684
For Steve Pagano - Another take apart vector
« on: August 22, 2007, 10:29:11 PM »
Steve,
Pics of the fully take apart vector attached  - note all the filler on the nose - this is from re-shaping the nose of an ARC as I didnt like it - take apart worked really well - didnt like the covering I did on this (and the fact it was an ARC so gave it to a friend) 

anyway - here it is
Logged
In the battle of airplane versus ground, the ground is yet to lose

Offline Wynn Robins

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1684
Re: For Steve Pagano - Another take apart vector
« Reply #1 on: August 22, 2007, 10:30:45 PM »
more
Logged
In the battle of airplane versus ground, the ground is yet to lose

Offline Wynn Robins

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1684
Re: For Steve Pagano - Another take apart vector
« Reply #2 on: August 22, 2007, 10:32:06 PM »
and more
Logged
In the battle of airplane versus ground, the ground is yet to lose

Offline steve pagano

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 401
Re: For Steve Pagano - Another take apart vector
« Reply #3 on: August 22, 2007, 11:30:20 PM »
     Wynn thanks so much for the picks! i understand a take apart a little better and got some ideas ;D lol.


                               -Steve
Logged
Success isn't a destination.It's a journey!!!!!
A.M.A. 820-823

Offline rob biddle

  • Trade Count: (0)
  • Commander
  • ****
  • Posts: 231
Re: For Steve Pagano - Another take apart vector
« Reply #4 on: August 23, 2007, 01:02:55 AM »
 Hi Wynn,
That looks really good, you must have read that IMPACT article a couple of times I bet.

Do you know how much extra weight you added by incorporating the take apart features?

Cheers, Rob.
Logged
Robert Biddle

Offline Wynn Robins

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1684
Re: For Steve Pagano - Another take apart vector
« Reply #5 on: August 23, 2007, 03:27:57 PM »
Rob - I have not read the Impact article - I have seen  a few different plans tho (seeing as I have around 700 of them) so have ideas that I toyed around with.

I added maybe 2-3 oz only in weight - there is not a lot to it - mostly 1/8th light ply - the heaviest bits would be the 4/40 bolts - and that is not a lot!!!!

Logged
In the battle of airplane versus ground, the ground is yet to lose

Offline Dennis Adamisin

  • 2019 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 4344
Re: For Steve Pagano - Another take apart vector
« Reply #6 on: August 23, 2007, 06:10:40 PM »
Wynn:
NICE piece of work   CLP**

Must have been especially challenging adapting take-apart features to the ARC rather than purpose built from the start.
Logged
Denny Adamisin
Fort Wayne, IN

As I've grown older, I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake!

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags:
 


Advertise Here