stunthanger.com

General control line discussion => Open Forum => Topic started by: Wynn Robins on August 22, 2007, 10:29:11 PM

Title: For Steve Pagano - Another take apart vector
Post by: Wynn Robins on August 22, 2007, 10:29:11 PM

Steve,
Pics of the fully take apart vector attached  - note all the filler on the nose - this is from re-shaping the nose of an ARC as I didnt like it - take apart worked really well - didnt like the covering I did on this (and the fact it was an ARC so gave it to a friend) 

anyway - here it is

Title: Re: For Steve Pagano - Another take apart vector
Post by: Wynn Robins on August 22, 2007, 10:30:45 PM

more

Title: Re: For Steve Pagano - Another take apart vector
Post by: Wynn Robins on August 22, 2007, 10:32:06 PM

and more

Title: Re: For Steve Pagano - Another take apart vector
Post by: steve pagano on August 22, 2007, 11:30:20 PM

     Wynn thanks so much for the picks! i understand a take apart a little better and got some ideas ;D lol.


                               -Steve

Title: Re: For Steve Pagano - Another take apart vector
Post by: rob biddle on August 23, 2007, 01:02:55 AM

 Hi Wynn,
That looks really good, you must have read that IMPACT article a couple of times I bet.

Do you know how much extra weight you added by incorporating the take apart features?

Cheers, Rob.

Title: Re: For Steve Pagano - Another take apart vector
Post by: Wynn Robins on August 23, 2007, 03:27:57 PM

Rob - I have not read the Impact article - I have seen  a few different plans tho (seeing as I have around 700 of them) so have ideas that I toyed around with.

I added maybe 2-3 oz only in weight - there is not a lot to it - mostly 1/8th light ply - the heaviest bits would be the 4/40 bolts - and that is not a lot!!!!

Title: Re: For Steve Pagano - Another take apart vector
Post by: Dennis Adamisin on August 23, 2007, 06:10:40 PM

Wynn:
NICE piece of work   CLP**

Must have been especially challenging adapting take-apart features to the ARC rather than purpose built from the start.