Thanks Guys!
This was a laser kit I won a few years ago and felt it was time to try my hand at something other then profiles.
It is polyspan on the wing and stab, silk span on everything else.
It is done like most folks do it.
It is all Randolph dope.
3-4 coats of clear dope, a coat of white, then most of it sanded off. Another coat of white, then a coat of red, then the gray.
steel wool the entire thing then added a few ink lines and a coat of clear on top. Automotive clear on the nose to keep raw fuel from attacking the dope. Mask graphics was provided by Louis.
Started it last February so I guess I had two winter projects.