Author Topic: Converting 2 line sidewinder model too Monoline (Read 727 times)

Robert Bolton · « **on:** April 10, 2007, 03:27:18 PM »

I have a 29 and a 61 powered sidewinder models both in 2 line configuration and would like to convert them to Monoline. Is there a preferred way? Any Ideas Pictures or Diagrams would be much appreciated

Thanks in Advance
Robert Bolton

PS This monoline flying has become addictive

Joey Mathison 9806 · « **Reply #1 on:** April 10, 2007, 04:43:20 PM »

Robert I think Billy Hughes has some pics of the tourque rod he is by far a great one to get this advise from the ships i use that he made we perfict groovers and that is very important.

Bill Hughes · « **Reply #2 on:** April 10, 2007, 05:44:28 PM »

Robert,
Check out these pitcures. If you have questions, send me an email... williamhughes4@comcast.net

Bill Hughes · « **Reply #3 on:** April 10, 2007, 05:46:45 PM »

More pictures..... The Wire is the same dia as the flying wire or .002" larger. The Torque Rod is .062-.080 dia.
Bill

Robert Bolton · « **Reply #4 on:** April 10, 2007, 06:38:16 PM »

Bill thankyou for your fast reply and pics! For me a picture is worth a thousand words so they have answered many questions. If I get stuck I will Email.

Thanks Again
Robert Bolton

Joey Mathison 9806 · « **Reply #5 on:** April 10, 2007, 09:53:57 PM »

thanks Bill

Author Topic: Converting 2 line sidewinder model too Monoline (Read 727 times)

Robert Bolton

Converting 2 line sidewinder model too Monoline

Joey Mathison 9806

Re: Converting 2 line sidewinder model too Monoline

Bill Hughes

Re: Converting 2 line sidewinder model too Monoline

Bill Hughes

Re: Converting 2 line sidewinder model too Monoline

Robert Bolton

Re: Converting 2 line sidewinder model too Monoline

Joey Mathison 9806

Re: Converting 2 line sidewinder model too Monoline