One layer of .6oz fiberglass cloth adhered with Z-Poxy Finishing Resin. Dry sand with 80 grit to break the "glaze". Then 220 grit. One additional coat Finishing resin to fill the weave. Start sanding with 80 grit and finish up dry sanding with 320 grit. Apply fillets (15 minute epoxy with micro-balloons and thinned with denatured alcohol to almost watery and applied with a "mono-ject" syringe). One coat of Klass Kote Primer sprayed at 1 part primer, 1 part catalyst, 1 part thinner. Wet sanded with 320. Fill dents with Bondo putty and sand. One additional coat Klass-Kote primer. Wet sand with 400 grit. 1 coat color sprayed as 1 part color, 1 part catalyst, 2 parts thinner. NO further sanding or clear coating. ALL primer and color coats can be applied on same day if you get started before 9am.
There ya have it......My answer to your direct question.
nice finish on that one. what is your finishing process and materials?