Forget about 6061-T6 it's soft and gummy to work with. Get some 2024-T3, T4 or T6. If you need the best 7075-T651 is very hard and tough, machines like brass, good for making conrods, bellcranks and other critical components. What do you need exactly, I probably have it.MM
Thanks for the advice.1/4" plate is only 6.35mm. With a 3mm hole drilled it that only leaves 1.6mm on each side of the hole. Is that enough? I'm away from my shop today. How thick are the mounts we use for FORA F2d's?