Well, guys, I finally got around to doing some building after the building season is about over here in Northwest Ohio. I'm building a fun scale Tri-Pacer as a test unit for an intended F4B scale "Tripe". The fun scale ship is so I can model the full scale airplane I a)got my private license in, B)purchased later to start my flight school with, and C)didn't take enough pictures of it to model properly! The F4B ship will be built using Mark Lanterman's DVD documentation. It's really good.
My partner and I repainted the full scale one and I love the scheme, so here it is. (First picture.)
The model is a 58" span, this one is from a kit that Roger Wildman gave me by Sterling. (And yes, it IS a typical Sterling kit!
Power here is a Saito 56, 4 stroke, while the F4B ship will have my RCV60-SP so I can totally cowl it. The nose gear is built using brass telescoping tubing, high temp silver solder, and pickup springs from my guitar parts bin. I made the arm from 2024 aluminum knowing that I wanted a quite long one to lesson the range of travel and it also is the main keeper for the gear. I'll shorten the set screws later.
This will be a long build for me as I don't put a lot of time in at the model bench any more, but it won't take me until 2020 as Roger claimed!
The last picture is of the male buck I have ready to use to make the female mold for a combination fiberglass/carbon fiber unit. You can't tell much in this picture, but since I took it I'll post it. I was just informed my files are too big for a single post. I'll put the rest of the pics below in reply posts. The last picture is of the male buck I have ready to use to make the female mold for a combination fiberglass/carbon fiber unit. You can't tell much in this picture, but since I took it I'll post it.
Control will be with Clancy's 5 channel unit and will use flaps, steerable nose gear, throttle, and maybe brakes. The last depends on how clever I can get to build a set.
This won't be any steady reporting like the great Proctor Jenny or Allen's re-do on the Waco, but I'll try to keep you abreast of the project as I go.
Blessings,
Will