News:



  • May 03, 2024, 11:32:49 PM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: Race 300 Wing  (Read 883 times)

Offline phil c

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2480
Race 300 Wing
« on: February 20, 2010, 01:37:47 PM »
I've got the new Race 300 wing ready to go.  It comes in 24 in. panels with a root chord of 10 in. and a tip chord of 6.3 in .  The root is 1.25 in. thick(to accomodate internal controls where allowed) and the tip is 1.06 in.

Stop by http://home.earthlink.net/~philcartier to check it out.
Logged
phil Cartier

Offline dick shannon

  • Trade Count: (0)
  • New Pilot
  • *
  • Posts: 23
Re: Race 300 Wing
« Reply #1 on: August 06, 2010, 10:53:39 PM »
i use Phil's 300 inch wings on my sport speed planes which are Fox racers.... LIMITED SPEED LAST SEASON WAS 112 MPH FROM a proto start for 14 laps.. Unlimited same type of wing it went a record of 118.51 will use this wing on this years events also.. Thanks to Phil
Logged

Offline Paul Smith

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 5801
Re: Race 300 Wing
« Reply #2 on: August 08, 2010, 07:02:02 AM »
Excellent speeds for a Fox 35 Stunt !  What prop?
Logged
Paul Smith

Offline dick shannon

  • Trade Count: (0)
  • New Pilot
  • *
  • Posts: 23
Re: Race 300 Wing AZ George Browns Sport Speed event 2010
« Reply #3 on: August 09, 2010, 09:01:56 PM »
The unlimited class limited the prop to 9/6 only APC. Unlimited is any prop and pressure...i ran Steve E's props.... with the any engine rule this year,meaning FIRE 36s the speeds are going to ROCK..... The big block .36s will show up for sure....  ~^ y1
Logged

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags:
 


Advertise Here