A 54” wingspan, 575 square inch, built-up fuselage Grumman F8F Bearcat. The airplane is designed as a Fun Scale airplane. The fuselage is strip planked with 3/32 balsa. The builder will have to cut the planking strips from the sheet wood supplied in the kit. The wing is sheeted with 1/16 balsa. The rib profile is the NACA 230 series used in the full scale airplane. This is a .50 to .60 size airplane, do not try to fly it with an old weak .45. It will be great with a newer .50 to .60 engine. It will be a Fun Scale competitor, or a fun sport flier. The airplane has fixed gear. The airplane will be able to stunt, but will not be an airplane for flying a pattern in competition. The laser cut kit comes with full size CAD plans with templates for all the parts. The kit does not contain any control system hardware or a canopy. The first kits will sell for $195.00 plus postage on 6 pounds from Zip Code 60449. The finished airplane should be less than 5 pounds.