Author Topic: What wax to use? (Read 1895 times)

Mike Scholtes · « **on:** September 17, 2008, 06:42:25 PM »

What is the right type of wax to apply to a clear dope finish after buffing the final clear coat? Any suggestions on brand and where to get it?

Randy Powell · « **Reply #1 on:** September 17, 2008, 08:53:19 PM »

I usually use Maguires. Doesn't hurt to hit it with a hand glaze either.

Mike Scholtes · « **Reply #2 on:** September 18, 2008, 08:21:59 PM »

You can get bowling alley wax?

Thanks guys. Looks like Maguires is it. We have some good auto supply shops I will check out.

Larry Wong · « **Reply #3 on:** September 19, 2008, 06:32:54 PM »

Mike I use Meguiar's also , after I rib it out I use Deep Chrystal Polish ,then the final coat I use Mirror Glaze (16) Carnuba Wax
worls great on 2 stage PPG and Clear dope, for that matter on color dope also. See you at Meet and Meat Sunday

Don Hutchinson AMA5402 · « **Reply #4 on:** September 21, 2008, 06:05:18 PM »

I'm using Aero Gloss.
Don

Patrick Rowan · « **Reply #5 on:** September 21, 2008, 06:32:16 PM »

I use Turtle Wax. It shines nice & its cheap. At the Dollar General store.

Will Davis · « **Reply #6 on:** September 28, 2008, 07:51:49 PM »

I use NuFinish ( bought at any auto supply store , Walmart , etc ) the liquid not the paste . It seems to go on and polish up easier than some of the paste waxes . Gives good protection for raw fuel too .

Will

Author Topic: What wax to use? (Read 1895 times)

Mike Scholtes

What wax to use?

Randy Powell

Re: What wax to use?

Mike Scholtes

Re: What wax to use?

Larry Wong

Re: What wax to use?

Don Hutchinson AMA5402

Re: What wax to use?

Patrick Rowan

Re: What wax to use?

Will Davis

Re: What wax to use?