If im monokoting the wing can i put on colour dope for trim. If so do i need to spray clear over it. Also can i get away with 4 coats of clear then colour then five or so coats on top
I've never done it, so this is my best guess:
It shouldn't hurt the Monokote, because I've gotten plenty of dope oversprayed onto it and easily cleaned it off later with acetone. I think you might want to mask it and then use some fine sandpaper to scuff the areas to be painted. I'd guess clear on top is optional for appearence. Clear underneath might be good insurance so if you botch the color, maybe you can sand it off and repaint. Maybe someone has actually done this and knows for sure.
Get a test patch out and try it. It might peel off if you try to shrink the Monokote after the painting is done. You know how the 'Kote likes to stretch and loosen in the sun. So that should be part of your testing. I'd put it through hell during the testing, just like a day in the hot sun at the field, then re-tightening later back in the shop.
Let us know, I'm curious now.
Rusty