Hello Pilots

I Know that alot of guy's and girls use Sig's Lite-Coat dope to finish there planes for a fuel proof upto 15% nitro
but where does Brodaks Crystal Clear Dope stand at

Is it fuel proof ?   

And how much nitro will it take ?

Thanks Bryan

I guess i'll use polyurethane clearcoat .  I wanted to use Brodak Dope products all the way
but i have to use 10 - 15% nitro here in Colorado to get good engine runs. 

Are flying field is at 6100ft  elevation.   

Was Glass Kote a mis-print of Klass Kote, the epoxy, or a whole 'nother product?

Was Glass Kote a mis-print of Klass Kote, the epoxy, or a whole 'nother product?

Larry, Yes it was, ny bad.
Dennis

I use Randolph Nitrate, tautening for undercoating balsa surfaces and for applying silk, then switch to non-tautning butyrate for final clear coats. I then use Brodak Crystal clear for final two coats after color.

My bad, I meant tautening butyrate for the final clear coats before color. I found out that the butyrate colors from Randolph are all non-tautening. John, didn't mean to confuse anyone, the Randolph stuff is cheaper than the LHS dope, so thats the reason I've been using it. Been back at this less than 2 years and have learned so much fron this forum and others. See, an old dog can learn new tricks! Even learned how to use a spray gun.