Author Topic: 3 view Vector 40 (Read 2230 times)

catdaddy · « **on:** March 18, 2009, 01:42:50 PM »

Anyone have a small 3 view drawing of a Vector 40?
I'd like to layout some paint schemes

Thanks

Lyle Spiegel · « **Reply #1 on:** March 28, 2009, 10:54:10 AM »

If you get anything- please share- I would like to do the same. I have my V40 in silkspan & clear and need to decide about trim color layout.
Thanks in advance.

Matt Colan · « **Reply #2 on:** March 28, 2009, 02:36:44 PM »

Use the box picture and make your adjustments to your preferences for paint colors

You could also try to draw out the profile of it as best you can and then color the colors you want on. And make about a dozen or so copies. I do this with my Oriental Plus, I traced over the plans in the article made a bunch of copies of the drawing and then colored them in with sharpie.

John Miller · « **Reply #3 on:** March 29, 2009, 09:29:49 PM »

Try this guys

jim gilmore · « **Reply #4 on:** March 29, 2009, 10:15:47 PM »

Hey, thanks wish I could make outlikes of the models I do for the sqame reason. Most of the 3-views have way to many shades for use fill for color .

Glenn (Gravitywell) Reach · « **Reply #5 on:** March 29, 2009, 10:16:51 PM »

Hi John....thanks a bunch. I was hopeing someone woould post a 3 view....I was wanting one as well. Many thanks.

Gary Anderson · « **Reply #6 on:** March 30, 2009, 10:21:54 AM »

Hi guys,

Can't you just take a picture of your own plane and down load it in paint and make your own design? I'm don't know much about computers but I believe this can be done. Have fun, Gary

Balsa Butcher · « **Reply #7 on:** March 30, 2009, 10:39:11 AM »

Aww, you don't need no 3 view - try the Zen method. Just place your covered but unpainted model where you can see it while you are watching TV, doing bills, framing up your next world beater etc. Keep glancing over its way and sooner or later it will tell you how it wishes to be painted.

Of course browsing through old issues of Stunt News, a possible trip to the local general aviation airport, or even perusing through custom car, boat and hot road magazines may expedite that inspirational moment.

Wade Bognuda · « **Reply #8 on:** April 02, 2009, 06:45:24 PM »

Quote from: Pete Cunha on March 30, 2009, 10:39:11 AM

Aww, you don't need no 3 view - try the Zen method. Just place your covered but unpainted model where you can see it while you are watching TV, doing bills, framing up your next world beater etc. Keep glancing over its way and sooner or later it will tell you how it wishes to be painted.

Of course browsing through old issues of Stunt News, a possible trip to the local general aviation airport, or even perusing through custom car, boat and hot road magazines may expedite that inspirational moment.

[/u]
That has always been usefull to me.

Ward Van Duzer · « **Reply #9 on:** April 02, 2009, 07:07:08 PM »

Anyone think of trying Randy? Duh!

w.

Steve Helmick · « **Reply #10 on:** April 02, 2009, 09:13:29 PM »

Thanks for posting the 3-view, John. It doesn't show up as much until you crick on it and it gets big. I've saved it to my computer. What took the bite out of the top of the fin? Did your mouse get hungry?

Steve

Author Topic: 3 view Vector 40 (Read 2230 times)

catdaddy

3 view Vector 40

Lyle Spiegel

Re: 3 view Vector 40

Matt Colan

Re: 3 view Vector 40

John Miller

Re: 3 view Vector 40

jim gilmore

Re: 3 view Vector 40

Glenn (Gravitywell) Reach

Re: 3 view Vector 40

Gary Anderson

Re: 3 view Vector 40

Balsa Butcher

Re: 3 view Vector 40

Wade Bognuda

Re: 3 view Vector 40

Ward Van Duzer

Re: 3 view Vector 40

Steve Helmick

Re: 3 view Vector 40