Hi Fred,
Burt Brokaw, another of the Cholla Choppers here in Tucson, discovered "Starbond High Performance Grade" cyanoacrylate adhesive some years ago. Like a good buddy should, he notified the rest of us about it and now several of us order it in quantities of 16 oz bottles from CPH International, Los Angeles, CA 90005, Phone 1-800-900-GLUE,
www.starbond.com. It's made in Japan.
They also supply one or two oz. containers to transfer small amounts of the stuff into as well as "Kicker" in 16 oz. bottles with smaller spray bottles for applicators.
The stuff works very well and solved my CA problems that were probably worse than yours because of the high temps here in Tucson (130 F) during the summer in my work area without the air conditioner working. Yes I have an air conditioner there as well as a refrigerator where I keep the large bottles. However I've had no issues so far (two summers) with the stuff in the small bottles not kept in the refrigerator.
Delivery of the stuff has so far been quick with no issues.
The thin stuff is very quick to set and very strong. I have the kicker also but have not had much occasion to use it with the thin stuff. It's very dry here in Tucson in the winter time with humidity levels typically below 8%. Most CA's have issues with setting quickly here without CA and I have had occasion to use it under these conditions.
Highly recommend trying this stuff. It works for me and others here!
Randy Cuberly