What is the bestest-flying, goodest-looking profile stunt ship for LA-46?

[Dale Nicholls]

This is great timing as I am scratch building the Fancherixed Twister at the moment.
I have made a couple of personal changes in the Fuselage shape and also fitted my gear into the wings.
Motor for this will of course be the OS LA 46.

[Scott Richlen]

Looks like a really good build!

[proparc]

This is great timing as I am scratch building the Fancherixed Twister at the moment.
I have made a couple of personal changes in the Fuselage shape and also fitted my gear into the wings.
Motor for this will of course be the OS LA 46.

Nice clean work!!!

[Scott Richlen]

Okay!  The results are in!  The winner of the bestest-flying, goodest-looking profile stunt ship for LA-46 is the....

wait for it.....

TAA-DAA....

Imitation

The floor is now open for any demands for a recount or accusations of ballot-box stuffing.

So, how do I get from the root and tip rib drawings on the plans to the proper lofted ribs in proper language for a buddy of mine to laser-cut some ribs for me?

[Bill Heher]

Get the plans for the TEOSAWKI ( The End Of Stunt As We Know It), and have a club night cutting kits, one group doing ribs, one tail feathers, one fuselage, 1 small parts. Bag them into kits and everyone starts from the same spot.

Good flying, easy building, easy to trim plane that an LA will do great in.

[Scott Richlen]

have a club night cutting kits, one group doing ribs, one tail feathers, one fuselage, 1 small parts. Bag them into kits and everyone starts from the same spot

A production line!  Good idea!

[PerttiMe]

There have been TEOSAWKI plans files around. Perhaps even here in some old threads?

[Dwayne Donnelly]

Forgot about the Forerunner, good looking great flying plane that Bob Hunt cuts cores for.

[John Hammonds]

There have been TEOSAWKI plans files around. Perhaps even here in some old threads?

Good TEOSAWKI page here http://www.machineconcepts.co.uk/aeromodelling/teosawki/teosawki.htm

Plans, Templates just about everything you might need.

TTFN
John.

[Daniel_Munro]

There are a few guys here in New Zealand flying Pizzaz with an LA46 up front. It’s a terrific flying plane. On occasion these have beaten big full fuse models.

I have a PDF of the plans. If interested send me a message and I can email.

[Doug Moon]

Here are the Tiburon plans. 
I think Gordon VT had ribs laser cut by RSM.

Thank you
Doug

[Ken Culbertson]

This is great timing as I am scratch building the Fancherixed Twister at the moment.
I have made a couple of personal changes in the Fuselage shape and also fitted my gear into the wings.
Motor for this will of course be the OS LA 46.

Just for grins, I super Fancherized mine.  As well as the std Fancher mods, I added one rib to each wing and an extra 1" on each side of the stab.  I also added a fiberglass arrow shaft to the top of the fuselage and the bottom and another one in the center of the stab.  It was lost in a fire but for the year it flew it was the best performing plane I owned.  At 52oz it flew like a PA. 

The extra wing area was to support an extra 10oz weight added by going electric.  If you are going IC you won't need it.

Ken

[Ted Fancher]

Okay!  The results are in!  The winner of the bestest-flying, goodest-looking profile stunt ship for LA-46 is the....

wait for it.....

TAA-DAA....

Imitation

The floor is now open for any demands for a recount or accusations of ballot-box stuffing.

So, how do I get from the root and tip rib drawings on the plans to the proper lofted ribs in proper language for a buddy of mine to laser-cut some ribs for me?

Scott,  Check you P.M.s for a possible solution to some of those questions.