1/2 A Prowler

[Bootlegger]

 Guy's I seem to remember this kit, but not who put it out, can you help?  Thanks          

[Mike Callas]

http://flyinglines.org/kb.prowler.html
Great site BTW

[Dan McEntee]

   I think he means the 1/2A stunt model. I don't know if it was ever kitted. I think some one made foam cores for them, but I don't remember a kit.
    Type at you later,
    Dan McEntee

[Bootlegger]

 Guy's sure am obliged for the feed back, now is the a set of plans for this model, if so, where..  Again thanks...

[Bill Hummel]

Prowler 1/2A, Flying Models, 10/96 issue. Designed by Steve Buso, presented by Rob Aronstein. The late Scotty Smith cut the foam wing for the ship. I think Rob used a VA 049.  Super flying little ship! Rob was competitive with it in advanced, and into expert! Enjoy!  CD006

[Bootlegger]

  Thanks a lot, Bill. Do you think that a T D would fly it, or a Medallion 049?  Again much obliged   

[Bill Hummel]

Hi Gil. I’m not a 1/2A guy, better off listening to the gang that does lots of 1/2A! 

[Scott Richlen]

Do you think that a T D would fly it, or a Medallion 049?

There is a big power difference between a VA and a TeeDee or a Medallion.  You'll want the VA if the plane is to be flying the full pattern.