stunthanger.com

General control line discussion => Open Forum => Topic started by: Bootlegger on October 18, 2020, 12:53:13 PM

Title: 1/2 A Prowler
Post by: Bootlegger on October 18, 2020, 12:53:13 PM

 Guy's I seem to remember this kit, but not who put it out, can you help?  Thanks       y1    #^ :! :!

Title: Re: 1/2 A Prowler
Post by: Mike Callas on October 18, 2020, 01:39:44 PM

http://flyinglines.org/kb.prowler.html
Great site BTW

Title: Re: 1/2 A Prowler
Post by: Dan McEntee on October 18, 2020, 04:14:46 PM

   I think he means the 1/2A stunt model. I don't know if it was ever kitted. I think some one made foam cores for them, but I don't remember a kit.
    Type at you later,
    Dan McEntee

Title: Re: 1/2 A Prowler
Post by: Bootlegger on October 19, 2020, 11:50:57 AM

 Guy's sure am obliged for the feed back, now is the a set of plans for this model, if so, where..  Again thanks... H^^

Title: Re: 1/2 A Prowler
Post by: Bill Hummel on October 19, 2020, 03:08:07 PM

Prowler 1/2A, Flying Models, 10/96 issue. Designed by Steve Buso, presented by Rob Aronstein. The late Scotty Smith cut the foam wing for the ship. I think Rob used a VA 049.  Super flying little ship! Rob was competitive with it in advanced, and into expert! Enjoy!  CD006

Title: Re: 1/2 A Prowler
Post by: Bootlegger on October 19, 2020, 06:28:51 PM

  Thanks a lot, Bill. Do you think that a T D would fly it, or a Medallion 049?  Again much obliged    D>K y1

Title: Re: 1/2 A Prowler
Post by: Bill Hummel on October 20, 2020, 09:23:34 AM

Hi Gil. I’m not a 1/2A guy, better off listening to the gang that does lots of 1/2A! 

Title: Re: 1/2 A Prowler
Post by: Scott Richlen on November 01, 2020, 06:34:33 AM

Quote

Do you think that a T D would fly it, or a Medallion 049?

There is a big power difference between a VA and a TeeDee or a Medallion.  You'll want the VA if the plane is to be flying the full pattern.