Robert Z-
How was the CG and power with the Saito 30?
VR,
Chris
Hi, Chris - sorry for the late reply.
With the SAITO 30, all up weight of 11.2 ounces, the CG came out just as shown on the plans - 2 7/8 inches behind the lead edge.
With the Fox, all up weight of 10.9 inches, the CG shifted aft a small amount, maybe around 1/4 inch.
The flying characteristics were, as I recall, about the same.
Steve apparently like offset.
Severe rakeback on the leadouts and 5/8 rudder offset.
I did neither of those things.
Bob Z.