News:



  • June 29, 2025, 06:59:39 PM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: A little Info Please  (Read 889 times)

Offline Randy Ryan

  • AMA Member
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1766
A little Info Please
« on: March 14, 2009, 12:41:20 PM »
Can some one check their GB Nobler and tell me what the width of the landing gear is between the axle bends?

Thanks
Logged
Randy Ryan <><
AMA 8500
SAM 36 BO all my own M's

Online john e. holliday

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 22981
Re: A little Info Please
« Reply #1 on: March 16, 2009, 08:36:18 AM »
I am surprised no one has answered this.  The plane you are holding in the little photo is probably just slightly bigger than the GB Nobler.  I would measure and adjust accordingly.  Might start out at say 10 inches.  My thoughts,  DOC Holliday
Logged
John E. "DOC" Holliday
10421 West 56th Terrace
Shawnee, KANSAS  66203
AMA 23530  Have fun as I have and I am still breaking a record.

Offline james dean

  • AMA Member
  • Trade Count: (0)
  • Lieutenant
  • *
  • Posts: 74
  • Rebel with a cause AMA 467575
Re: A little Info Please
« Reply #2 on: March 16, 2009, 12:48:23 PM »
Randy,

I'm into Noblers just now and have been for awhile.  Are you needing numbers for fuse gear or wing gear?

James Dean
Logged

Offline Randy Ryan

  • AMA Member
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1766
Re: A little Info Please
« Reply #3 on: March 16, 2009, 01:04:48 PM »
Guys,

Thanks for the replies, I found the width, its 8 7/8", that's for the Green Box Nobler.

Doc, I'm not a large man, but I'm bigger then that, The model in my avatar has a 66" span and about 720 squares, considerably bigger then the little 50" Nobler. The track of the gear nearly 19".
« Last Edit: March 16, 2009, 07:25:07 PM by Randy Ryan »
Logged
Randy Ryan <><
AMA 8500
SAM 36 BO all my own M's

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags: