stunthanger.com

General control line discussion => Open Forum => Topic started by: Randy Ryan on March 14, 2009, 12:41:20 PM

Title: A little Info Please
Post by: Randy Ryan on March 14, 2009, 12:41:20 PM

Can some one check their GB Nobler and tell me what the width of the landing gear is between the axle bends?

Thanks

Title: Re: A little Info Please
Post by: john e. holliday on March 16, 2009, 08:36:18 AM

I am surprised no one has answered this.  The plane you are holding in the little photo is probably just slightly bigger than the GB Nobler.  I would measure and adjust accordingly.  Might start out at say 10 inches.  My thoughts,  DOC Holliday

Title: Re: A little Info Please
Post by: james dean on March 16, 2009, 12:48:23 PM

Randy,

I'm into Noblers just now and have been for awhile.  Are you needing numbers for fuse gear or wing gear?

James Dean

Title: Re: A little Info Please
Post by: Randy Ryan on March 16, 2009, 01:04:48 PM

Guys,

Thanks for the replies, I found the width, its 8 7/8", that's for the Green Box Nobler.

Doc, I'm not a large man, but I'm bigger then that, The model in my avatar has a 66" span and about 720 squares, considerably bigger then the little 50" Nobler. The track of the gear nearly 19".