Sig Twister Wing Ribs

[Airacobra]

Does anybody do a Laser cut set of these ribs? The ribs in the kit were rock hard and heavy, yes I could cut a new set, but was checking to see if any laser cut ones were available first.

[Ken Culbertson]

Does anybody do a Laser cut set of these ribs? The ribs in the kit were rock hard and heavy, yes I could cut a new set, but was checking to see if any laser cut ones were available first.

Just a thought.  Mine were the same, maybe not as bad but harder than I wanted.  I just hollowed them out more.  I wasn't overly concerned with weight since I was building electric and I needed something to balance that obscenely heavy battery.  I came out at 52 oz and it flew like it thought it was a PA.  In all fairness, I added half ribs and an extra 4" of span to support the weight.

Ken

[ericrule]

Mike at RSM has the laser cut file for the ribs. Call him at 951-678-1406 or e mail an order to him at rsm1rule@rsmdistribution.com. You can also order through the web site.

[Airacobra]

Looks like Mike does not have them, I will seek out another source. Thanks for the try!

[Geoff Goodworth]

Check with Walter.

He should have the cutting files for Bob Kruger's Fancher Twister.

[John Rist]

Check with Walter.

He should have the cutting files for Bob Kruger's Fancher Twister.

His web site is  http://www.builtrightflyright.com

[builditright]

Hi Keith, yes I make the Fancherized Twister, so I can cut you a set if you like.
I know they're the same but I can also cut them for the Banshee if you want them too. Just covering all the bases.
Can cut them from 1/16 or 3/32 regular wood or Contest wood if you like.

[Airacobra]

Walter, that would be great to have a set of Twister Ribs from 3/32. Email me the cost @ acsd2703@yahoo.com  Thanks Walter!!