stunthanger.com
General control line discussion => Open Forum => Topic started by: Airacobra on August 12, 2020, 09:16:56 AM
-
Does anybody do a Laser cut set of these ribs? The ribs in the kit were rock hard and heavy, yes I could cut a new set, but was checking to see if any laser cut ones were available first.
-
Does anybody do a Laser cut set of these ribs? The ribs in the kit were rock hard and heavy, yes I could cut a new set, but was checking to see if any laser cut ones were available first.
Just a thought. Mine were the same, maybe not as bad but harder than I wanted. I just hollowed them out more. I wasn't overly concerned with weight since I was building electric and I needed something to balance that obscenely heavy battery. I came out at 52 oz and it flew like it thought it was a PA. In all fairness, I added half ribs and an extra 4" of span to support the weight.
Ken
-
Mike at RSM has the laser cut file for the ribs. Call him at 951-678-1406 or e mail an order to him at rsm1rule@rsmdistribution.com. You can also order through the web site.
-
Looks like Mike does not have them, I will seek out another source. Thanks for the try!
-
Check with Walter.
He should have the cutting files for Bob Kruger's Fancher Twister.
-
Check with Walter.
He should have the cutting files for Bob Kruger's Fancher Twister.
His web site is http://www.builtrightflyright.com
-
Hi Keith, yes I make the Fancherized Twister, so I can cut you a set if you like.
I know they're the same but I can also cut them for the Banshee if you want them too. Just covering all the bases. ;)
Can cut them from 1/16 or 3/32 regular wood or Contest wood if you like.
-
Walter, that would be great to have a set of Twister Ribs from 3/32. Email me the cost @ acsd2703@yahoo.com Thanks Walter!!