News:



  • June 08, 2024, 08:33:43 AM

Login with username, password and session length

Author Topic: Sig and Wicks  (Read 941 times)

Offline RC Storick

  • Forum owner
  • Administrator
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12421
  • The finish starts with the first piece of wood cut
    • Stunt Hangar
Sig and Wicks
« on: June 30, 2008, 05:22:25 PM »
Sig Manufacturing and Wicks aircraft are now back on line as advertisers. If you use them please let them know you saw them here.
AMA 12366

Alan Hahn

  • Guest
  • Trade Count: (0)
Re: Sig and Wicks
« Reply #1 on: June 30, 2008, 11:55:53 PM »
Out of curiosity, I bought a kit from SSHobbies--linking from this site. Do you know if you get any credit? I realize now I should have put a comment in the order about it, and will do it.

There is another thing I noticed, Sometimes when I look in the vendor's section below, it is actually difficult to find the vendor's web sites (if they have one). Is it possible to have the web site more obvious in their forum??

Offline RC Storick

  • Forum owner
  • Administrator
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12421
  • The finish starts with the first piece of wood cut
    • Stunt Hangar
Re: Sig and Wicks
« Reply #2 on: July 01, 2008, 05:27:53 AM »
Out of curiosity, I bought a kit from SSHobbies--linking from this site. Do you know if you get any credit? I realize now I should have put a comment in the order about it, and will do it.

There is another thing I noticed, Sometimes when I look in the vendor's section below, it is actually difficult to find the vendor's web sites (if they have one). Is it possible to have the web site more obvious in their forum??

The reason its hard to find a vendors site from vendors section is that it is up to each vendor to link their site to here from there. They have control over thier section.

And NO We get no credit for them selling stuff from here. However we do get their advertising revenue and they will not renew unless its working. So please tell them when you order that you saw them here.
AMA 12366

Offline john e. holliday

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 22794
Re: Sig and Wicks
« Reply #3 on: July 01, 2008, 08:26:54 AM »
I think Frank C. and also Blackhawk Models as well as Bill S. plus several others know where I see their products.  DOC Holliday
John E. "DOC" Holliday
10421 West 56th Terrace
Shawnee, KANSAS  66203
AMA 23530  Have fun as I have and I am still breaking a record.


Advertise Here
Tags:
 


Advertise Here