News:



  • June 27, 2025, 07:04:40 AM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: Setting Problems  (Read 960 times)

Offline Garf

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1817
    • Hangar Flying
Setting Problems
« on: June 10, 2007, 04:37:14 PM »
As the temps near 90 and the humidity rises, I am having trouble getting good needle settings. What changes do I need to make to help with this problem? I am running Johnson and Super Tigre 35's. I think I need to adjust nitro and oil levels. Any ideas?
Logged

Offline Peter Nevai

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 975
    • C3EL
Re: Setting Problems
« Reply #1 on: June 11, 2007, 09:55:41 AM »
Hmmm. We need a chemical engineer in on this one.

Need to cool the fuel and have it burn colder in the engine. At 90 degrees the fuel is already trying to vaporize at a accellerated rate. Put  the fuel in a cooler with ICE and keep the tank covered with a towel out of the direct sun may help.

Any Ideas anyone?

Hmmmm. I wonder if anyone tried keeping thier fuel on Ice before.
Logged
Words Spoken by the first human to set foot on Mars... "Now What?"

Offline Garf

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1817
    • Hangar Flying
Re: Setting Problems
« Reply #2 on: June 16, 2007, 03:44:08 PM »
I set up a marathon engine running session today to test various things. Seems the plugs that ran fine under other conditions wouldn't work under these conditions. I also had a compression leak in the Johnson SS. A few new Thunderbolt plugs helped. Now to see how they fly. I need to order some more.
Logged

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags: