Link 1
Stunt Hangar YouTube
P.A.M.P.A.
AMA
Balsa Density Calculator
This topic
This board
Entire forum
Google
Home
Help
Tags
Advertise
Login
Register
News:
---->Stunt News click here<----
June 08, 2024, 02:16:30 AM
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
stunthanger.com
»
General control line discussion
»
Open Forum
(Moderators:
RandySmith
,
Steve Berry
) »
Sealer for Brodak ARF film?
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Sealer for Brodak ARF film? (Read 583 times)
peabody
23 supporter
Trade Count:
(
0
)
Admiral
Posts: 2868
Sealer for Brodak ARF film?
«
on:
August 05, 2021, 07:04:15 PM »
Is there a sealer that can seal the seams of Brodak film that is used on ARFs?
I have tried the monocoat sealer to no avail.....
Thinner dope?
TIA
Peabody
Logged
See Ya
Peabody
www.manateerc.com
http://circleburners.wix.com/circleburners
Dan McEntee
23 supporter
Trade Count:
(
0
)
Admiral
Posts: 6919
Re: Sealer for Brodak ARF film?
«
Reply #1 on:
August 05, 2021, 07:32:46 PM »
Monokote Trim Cement, if it is still available, or brush some thinned Balsa-Rite or SIG Stix-It under the loose edges and seal down.
Type at you later,
Dan McEntee
Logged
AMA 28784
EAA 1038824
AMA 480405 (American Motorcyclist Association)
Bill Barber
Trade Count:
(
0
)
Commander
Posts: 259
Re: Sealer for Brodak ARF film?
«
Reply #2 on:
August 05, 2021, 07:50:05 PM »
I have used thinned 5 minute epoxy to seal edges.
Bill Barber
Logged
AMA 325076
Phil Spillman
2017
Trade Count:
(
0
)
Captain
Posts: 805
Re: Sealer for Brodak ARF film?
«
Reply #3 on:
August 09, 2021, 08:20:02 AM »
Hi Rich, A mixture of 50% Fletch Glue, the stuff used to mount feathers and such on arrows, and MEK or substitute, has worked for me. Apply with a q tip.
Phil Spillman
Logged
Phil Spillman
Kim Doherty
Trade Count:
(
0
)
Commander
Posts: 154
Re: Sealer for Brodak ARF film?
«
Reply #4 on:
August 09, 2021, 10:44:28 AM »
Reducer wiped into the edge will reactivate the adhesive. I use reducer to apply all of my trim film. Note: only work small areas at a time as you have about ten seconds to press it down.
Kim
Logged
Advertise Here
Print
Pages: [
1
]
Go Up
« previous
next »
Tags:
stunthanger.com
»
General control line discussion
»
Open Forum
(Moderators:
RandySmith
,
Steve Berry
) »
Sealer for Brodak ARF film?
Advertise Here