Sealer for Brodak ARF film?

[peabody]

Is there a sealer that can seal the seams of Brodak film that is used on ARFs?
I have tried the monocoat sealer to no avail.....
Thinner dope?

TIA

Peabody

[Dan McEntee]

  Monokote Trim Cement, if it is still available, or brush some thinned Balsa-Rite or SIG Stix-It under the loose edges and seal down.
  Type at you later,
   Dan McEntee

[Bill Barber]

 I have used thinned 5 minute epoxy to seal edges.
                 Bill Barber

[Phil Spillman]

Hi Rich, A mixture of 50% Fletch Glue, the stuff used to mount feathers and such on arrows, and MEK or substitute, has worked for me. Apply with a q tip.

Phil Spillman

[Kim Doherty]

Reducer wiped into the edge will reactivate the adhesive. I use reducer to apply all of my trim film. Note: only work small areas at a time as you have about ten seconds to press it down.

Kim