Question for the guys on the HP40 waiting list

[Brian Gardner]

Out of the 14 people on the waiting list for the HP40 ABC sets how many of you will need shims to bring the liner back up to original deck height?

My ABC sets will be intended to standard cases that haven't been machined to lower the liner/timing.

So to clarify - If your engines are stock you won't need them.

[tom hampshire]

Brian, I can make liner shims if needed, so don't send them on my order.  I take it your liners will have 138/126 timing when installed in a stock case?  Hopefully other customers will answer so questions about internal dimensions can be resolved before manufacture.  Best!

[Skip Chernoff]

I won't need the shims,my engine is stock. Thanks,Skip

[Brian Gardner]

thanks fellas, I'll mark you off accordingly on the list.

Yes mine will be 138/126 in a stock case.

[tom hampshire]

Thanx.

[Larry Fruits]

Hi Brian,

 Sent P.M.

 Thanks;
  Larry

[Arlan McKee]

Hey, Brian,

My engines are stock.

Arlan

[BYU]

Out of the 14 people on the waiting list for the HP40 ABC sets how many of you will need shims to bring the liner back up to original deck height?

My ABC sets will be intended to standard cases that haven't been machined to lower the liner/timing.

Mine are stock, so probably don't need the shims

[Brian Gardner]

Thanks Arlan & Mike.

Just a few more people to confirm.

[Phil Spillman]

Hi Brian, Would you please add me to your list for 2 sets of liners and pistons with rods and wrist pins for the same? Thanks for your service!

Phil Spillman

ps Since I haven't sent any funds as yet would you please let me know what I owe you!

[Brian Gardner]

Phil,

Are your engines stock?

Do you want finned heads to replace smooth heads?

No money until I have them ready.

Brian

Hi Brian, Would you please add me to your list for 2 sets of liners and pistons with rods and wrist pins for the same? Thanks for your service!

Phil Spillman

ps Since I haven't sent any funds as yet would you please let me know what I owe you!