stunthanger.com

General control line discussion => Open Forum => Topic started by: Brian Gardner on February 25, 2018, 02:29:52 AM

Title: Question for the guys on the HP40 waiting list
Post by: Brian Gardner on February 25, 2018, 02:29:52 AM

Out of the 14 people on the waiting list for the HP40 ABC sets how many of you will need shims to bring the liner back up to original deck height?

My ABC sets will be intended to standard cases that haven't been machined to lower the liner/timing.

So to clarify - If your engines are stock you won't need them.

Title: Re: Question for the guys on the HP40 waiting list
Post by: tom hampshire on February 25, 2018, 06:59:14 AM

Brian, I can make liner shims if needed, so don't send them on my order.  I take it your liners will have 138/126 timing when installed in a stock case?  Hopefully other customers will answer so questions about internal dimensions can be resolved before manufacture.  Best!

Title: Re: Question for the guys on the HP40 waiting list
Post by: Skip Chernoff on February 25, 2018, 12:26:55 PM

I won't need the shims,my engine is stock. Thanks,Skip

Title: Re: Question for the guys on the HP40 waiting list
Post by: Brian Gardner on February 25, 2018, 01:55:47 PM

thanks fellas, I'll mark you off accordingly on the list.

Yes mine will be 138/126 in a stock case.

Title: Re: Question for the guys on the HP40 waiting list
Post by: tom hampshire on February 25, 2018, 02:44:27 PM

Thanx.

Title: Re: Question for the guys on the HP40 waiting list
Post by: Larry Fruits on February 26, 2018, 02:22:43 PM

Hi Brian,

 Sent P.M.

 Thanks;
  Larry

Title: Re: Question for the guys on the HP40 waiting list
Post by: Arlan McKee on February 26, 2018, 06:33:31 PM

Hey, Brian,

My engines are stock.

Arlan

Title: Re: Question for the guys on the HP40 waiting list
Post by: BYU on February 26, 2018, 07:06:25 PM

Quote from: Brian Gardner on February 25, 2018, 02:29:52 AM

Out of the 14 people on the waiting list for the HP40 ABC sets how many of you will need shims to bring the liner back up to original deck height?

My ABC sets will be intended to standard cases that haven't been machined to lower the liner/timing.

Mine are stock, so probably don't need the shims

Title: Re: Question for the guys on the HP40 waiting list
Post by: Brian Gardner on February 26, 2018, 10:40:42 PM

Thanks Arlan & Mike.

Just a few more people to confirm.

Title: Re: Question for the guys on the HP40 waiting list
Post by: Phil Spillman on February 27, 2018, 02:59:56 PM

Hi Brian, Would you please add me to your list for 2 sets of liners and pistons with rods and wrist pins for the same? Thanks for your service!

Phil Spillman

ps Since I haven't sent any funds as yet would you please let me know what I owe you!

Title: Re: Question for the guys on the HP40 waiting list
Post by: Brian Gardner on February 27, 2018, 04:18:04 PM

Phil,

Are your engines stock?

Do you want finned heads to replace smooth heads?

No money until I have them ready.

Brian

Quote from: Phil Spillman on February 27, 2018, 02:59:56 PM

Hi Brian, Would you please add me to your list for 2 sets of liners and pistons with rods and wrist pins for the same? Thanks for your service!

Phil Spillman

ps Since I haven't sent any funds as yet would you please let me know what I owe you!