Petternmaster wing flaps.

[Perry Rose]

   I'm drawing up a new stunter using a foam core Patternmaster wing. Can someone tell me the chord width of the flaps at the root and tip for the original Patternmaster?

[Bootlegger]

 Perry, you might check with Windy U.  Good luck, and keep us posted..

[jose modesto]

What's the root and tip. Can you also measure the highpoint and last, span of cores
There were 4 PM by Big Jim
There were many clones
I have 2 of Big Jims Pattern Master wing templates.
Jose Modesto

[Mike Griffin]

Perry I dug out my plans of the Pattern Master that Big Al Smith sent me...the root chord of the flap measures 3 3/8" and the Tip Chord measures 1 1/4".  I hope this is what you needed.

Mike

[Perry Rose]

That's what I needed, thanks Mike.

[Mike Griffin]

You are welcome Perry....glad to help

Mike

[Bill Little]

Perry I dug out my plans of the Pattern Master that Big Al Smith sent me...the root chord of the flap measures 3 3/8" and the Tip Chord measures 1 1/4".  I hope this is what you needed.

Mike

Mike is correct when speaking of the "Big" Patternmaster.  There are at least three other "official" Big Jim Paternmasters and who know how many other "Patternmasters". 

Perry, are the cores long enough to have about a 62" Wingspan with tips added?  If so it sounds like the "Big Patternmaster.

BIG Bear
RNMM/AMM

[Perry Rose]

Bill, yes the cores are 30 inches long each.

[Bill Little]

Bill, yes the cores are 30 inches long each.

Hi Perry,

The flap numbers given are for those cores.

BIG Bear
RNMM/AMM