OS 40 VF AAC piston sleeve set
THESE are now finished and in stock , If you want these , please place your order with you information ,
Randy 678 407 9376
Randyaero@msn.com
additional :
Along with the second batch I sent out I am including new G Clips for retaining the pin, When you install the new piston sleeve set, make sure you put the rod on with the chamfer on the bottom bushing, pointing toward the front of the motor, make sure you case is clean inside, and has NO cuts scratches or carbon, that will interfere with the aluminum sleeve, if there is sand it smooth, hone it smooth , or call me.
Lubricate the inside case and the outside of the sleeve with copious amounts of thick oil, like castor .
If there is any interference and the sleeve stops, do not force it. use common sense and you will be OK
There should not be any problems changing the P/S out in your motor, and you will lose an ounce
If you need any parts please contact me
Regards
Randy