News:



  • June 20, 2025, 11:21:46 AM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: Never give up!  (Read 3163 times)

Offline RC Storick

  • Forum owner
  • Administrator
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12561
  • The finish starts with the first piece of wood cut
    • Stunt Hangar
Never give up!
« on: April 25, 2014, 09:43:39 PM »
I have been working on making wheel pant molds for a week now. I made 4 molds that were less than stellar. I finally figured out how to poor a usable mold. Bottom right. Tomorrow I will make the other half. By the time I have these ready my E glass and S glass will be here along with the vacuum bagging supplies.


Very hard project but it has been fun. I am hoping to have good results and I am sure I will keep at it until they are correct.
Logged
AMA 12366

Offline Mark Scarborough

  • 2015
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 5918
Re: Never give up!
« Reply #1 on: April 25, 2014, 10:55:24 PM »
good job !! keep workin,,it will work
Logged
For years the rat race had me going around in circles, Now I do it for fun!
EXILED IN PULLMAN WA
AMA 842137

Dennis Leonhardi

  • Guest
  • Trade Count: (0)
Re: Never give up!
« Reply #2 on: April 25, 2014, 11:10:52 PM »
Nice job Robert, and you're proving the old axiom "Success is 99% perseverance ..."


Dennis
 :)
Logged

Offline pipemakermike

  • 2014 Supporters
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 250
Re: Never give up!
« Reply #3 on: April 26, 2014, 03:57:20 AM »
Hi Robert

My friend Brian Turner is something of an expert on moulding and is my goto person for knowledge on carbonfibre mouldings.  He has given be a set of his wheel pants (see picture) that weigh just 8 grams each.  If you want some pictures of his moulds I would be happy to take some.

Logged
Regards
Mike Nelson

Offline RC Storick

  • Forum owner
  • Administrator
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12561
  • The finish starts with the first piece of wood cut
    • Stunt Hangar
Re: Never give up!
« Reply #4 on: April 26, 2014, 04:43:55 AM »
Quote from: pipemakermike on April 26, 2014, 03:57:20 AM
Hi Robert

My friend Brian Turner is something of an expert on moulding and is my goto person for knowledge on carbonfibre mouldings.  He has given be a set of his wheel pants (see picture) that weigh just 8 grams each.  If you want some pictures of his moulds I would be happy to take some.



please do
Logged
AMA 12366

Online Crist Rigotti

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 4061
  • Electric - The future of Old Time Stunt
Re: Never give up!
« Reply #5 on: April 26, 2014, 07:30:35 AM »
Quote from: pipemakermike on April 26, 2014, 03:57:20 AM
Hi Robert

My friend Brian Turner is something of an expert on moulding and is my goto person for knowledge on carbonfibre mouldings.  He has given be a set of his wheel pants (see picture) that weigh just 8 grams each.  If you want some pictures of his moulds I would be happy to take some.



Nice looking wheel pant.
Logged
Crist
AMA 482497
Waxahachie, TX
Electric - The Future of Old Time Stunt

Offline MarcusCordeiro

  • 2013 Supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1872
  • "Never fly faster than your shoulder angel"
Re: Never give up!
« Reply #6 on: April 26, 2014, 09:37:26 AM »
Cool thread!!

Marcus
Logged
Live to fly, fly to live
Aces High!

"There's no try. Do or Do not." - Master Yoda

"Wealth and fame, he's ignorant
Action is his reward, look out
Here comes Marcus, man..."

Offline wwwarbird

  • 2016 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 8084
  • Welcome to the Stunt Hanger.
Re: Never give up!
« Reply #7 on: April 26, 2014, 04:47:58 PM »
Quote from: pipemakermike on April 26, 2014, 03:57:20 AM
Hi Robert

My friend Brian Turner is something of an expert on moulding and is my goto person for knowledge on carbonfibre mouldings.  He has given be a set of his wheel pants (see picture) that weigh just 8 grams each.  If you want some pictures of his moulds I would be happy to take some.



 VERY NICE! y1
Logged
Narrowly averting disaster since 1964! 

Wayne Willey
Albert Lea, MN U.S.A. IC C/L Aircraft Modeler, Ex AMA member

Dennis Leonhardi

  • Guest
  • Trade Count: (0)
Re: Never give up!
« Reply #8 on: April 26, 2014, 11:27:37 PM »
Sharp!

Don Jenkins posted a photo of his ARF Nobler in the Photo Gallery (District 4).  He's added wheel pants, and I personally think it really sets the airplane apart from the crowd - big time!


Dennis

Logged

Offline Ward Van Duzer

  • 2015
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1283
Re: Never give up!
« Reply #9 on: April 27, 2014, 08:28:09 AM »
Great look! But...

Gad, how I hate those spinners with the belly button!

Just Ward-0's opinion...


Try a washer or two behind the round headed bolt to finish off the fullness of the spinner.  H^^
Logged
I hate spelling errors, you mess up 2 letters and you are urined!

Don't hesitate to ask dumb questions.
They are easier to handle than dumb mistakes!  Ward-O AMA 6022

Offline Richard Logston

  • Trade Count: (0)
  • Commander
  • ****
  • Posts: 237
Re: Never give up!
« Reply #10 on: April 27, 2014, 09:19:23 AM »
FANTASTIC work !!
Logged

Offline Allan Perret

  • 2017
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1892
  • Proverbs
Re: Never give up!
« Reply #11 on: April 27, 2014, 09:39:02 AM »
Will you be selling the gear and pants thru Stunt Hangar Hobbyshop ?
Logged
Allan Perret
AMA 302406
Slidell, Louisiana

Offline RC Storick

  • Forum owner
  • Administrator
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12561
  • The finish starts with the first piece of wood cut
    • Stunt Hangar
Re: Never give up!
« Reply #12 on: April 27, 2014, 09:48:56 AM »
More than likely yes. Same with all my other stuff. As soon as I get the plastic dip I ordered and I make the arming plugs I will be posting everything I sell there. I just didn't want to do it piece meal.
Logged
AMA 12366

Offline James D. Hayes

  • AMA Member
  • Trade Count: (0)
  • Lieutenant
  • *
  • Posts: 74
Re: Never give up!
« Reply #13 on: April 27, 2014, 10:42:10 AM »
Rookie here, I think those are pretty. I'd clear coat them and put them on the plane. LOL!!


Jim Hayes
Logged
Just do it......

Offline RC Storick

  • Forum owner
  • Administrator
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12561
  • The finish starts with the first piece of wood cut
    • Stunt Hangar
Re: Never give up!
« Reply #14 on: April 27, 2014, 11:08:59 AM »
The finished molds. It took several tries to make something I think will be usable but there is a pic.


I am thinking of drilling a hole by where the wheel cutout would be to allow the vacuum to be pulled into the mold. I can tell you thins ,there is more work into making a mold than building a wing. It has taken me a week to get this far.
Logged
AMA 12366

Offline john e. holliday

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 22975
Re: Never give up!
« Reply #15 on: April 27, 2014, 05:45:26 PM »
Well young man those sure do look nice.
Logged
John E. "DOC" Holliday
10421 West 56th Terrace
Shawnee, KANSAS  66203
AMA 23530  Have fun as I have and I am still breaking a record.

Offline Randy Powell

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 10476
  • TreeTop Flyer
Re: Never give up!
« Reply #16 on: April 28, 2014, 12:30:20 PM »
Sounds like Galaxy Quest: "Never give up, never surrender"!
Logged
Member in good standing of P.I.S.T
(Politically Incorrect Stunt Team)
AMA 67711
 Randy Powell

Offline Avaiojet

  • 22 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 7468
  • Just here for the fun of it also.
Re: Never give up!
« Reply #17 on: April 28, 2014, 03:55:41 PM »
Did someone say "Galaxy Quest?"
Logged
Trump Derangement Syndrome. TDS. 
Avaiojet Derangement Syndrome. ADS.
Amazing how ignorance can get in the way of the learning process.
If you're Trolled, you know you're doing something right.  Alpha Mike Foxtrot. "No one has ever made a difference by being like everyone else."  Marcus Cordeiro, The "Mark of Excellence," you will not be forgotten. "No amount of evidence will ever persuade an idiot."- Mark Twain. I look at the Forum as a place to contribute and make friends, some view it as a Realm where they could be King.   Proverb 11.9  "With his mouth the Godless destroys his neighbor..."  "Perhaps the greatest challenge in modeling is to build a competitive control line stunter that looks like a real airplane." David McCellan, 1980.

Joe Just

  • Guest
  • Trade Count: (0)
Re: Never give up!
« Reply #18 on: April 28, 2014, 07:50:31 PM »
Quote from: Randy Powell on April 28, 2014, 12:30:20 PM
Sounds like Galaxy Quest: "Never give up, never surrender"!
You mean something like this? It soon becomes a way of life!
Joe
Logged

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags: