Lonestar Balsa

[riley wooten]

Mike tells me he has  some 4 to 6# wood that is 3-1/2" wide by 24" that can be cut into sheets if anyone can use this size. Lonestar also has a lot of 1-5/8" x 3-1/2" x 12"   4-6# blocks left over from a commerical job.  Good, light blocks for cowls, tips, pants,etc.
RW

[W.D. Roland]

Riley
No need for those sizes but so glad you are up and running again!

Any word on 4-6lb supply?
Down to 2 sheets of 1/16 x3 and feel withdrawal symptoms coming on!


Link to site
http://www.lonestar-balsa.com/

Hope you dont mind I post link everywhere when I remember.

David

[Mark Scarborough]

I for one will be checking in on the blocks, they are somthing you can never have enough of 

[riley wooten]

David,  Lonestar should have a lot of 3" and 4" x 36" in a few weeks, and hopefully a lot of it will be 4-6#
RW

[W.D. Roland]

Thanks Riley!
Hope to have finances back on track soon and restock.
Don't run out!!!(of balsa)

David