News:



  • June 16, 2024, 01:36:44 PM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: leadouts  (Read 1276 times)

Offline Paul Allen

  • 2014 Supporters
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 392
leadouts
« on: March 23, 2012, 12:50:31 AM »
guy's
       Noel Drindak had an article in a mag, it may have been stunt news,not sure.
He talked about doing the leadout ends on music wire and used a Dubro twist tool.
Can anyone name the mag?
Thanks
Paul
Logged

Offline Jim Treace

  • 24 supporter
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 255
  • 1979 600 Aerostar N79JT
Re: leadouts
« Reply #1 on: March 23, 2012, 10:48:02 AM »
Paul,
I only glanced at the article and don't remember much, but I use the DuBro wire twister for fishing wire and I have also used it on the Flight Streak Trainer...worked fine. The wire straightener is especially useful.  See link:
http://shop.proseriesfishing.com/products/category/101.2.314.409.0.0.0

Jim

Logged
Jim Treace
Ponte Vedra Beach, FL &
Paris, TN
AMA 855251 "Too soon we grow old...Too late we grow wise"

Offline Ward Van Duzer

  • 2015
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1284
Re: leadouts
« Reply #2 on: March 23, 2012, 12:12:32 PM »
This is so much easier...and cheaper!


Ward-O
Logged
I hate spelling errors, you mess up 2 letters and you are urined!

Don't hesitate to ask dumb questions.
They are easier to handle than dumb mistakes!  Ward-O AMA 6022

Offline Dick Pacini

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1630
Re: leadouts
« Reply #3 on: March 23, 2012, 06:21:23 PM »
Quote from: Ward Van Duzer on March 23, 2012, 12:12:32 PM
This is so much easier...and cheaper!


Ward-O

That's the way I always made mine.  I don't care for cable leadouts.
Logged
AMA 62221

Once, twice, three times a lady.  Four times and she does it for a living.  "You want me on that wall.  You need me on that wall."

Offline john e. holliday

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 22797
Re: leadouts
« Reply #4 on: March 24, 2012, 09:55:02 AM »
I will use solid wire leadouts for external controls.   But, the last time I used them on an internal setup, one wire got bent right at the leadout tube.   Kept hanging up as I could not get it out far enough to straighten.
Logged
John E. "DOC" Holliday
10421 West 56th Terrace
Shawnee, KANSAS  66203
AMA 23530  Have fun as I have and I am still breaking a record.

Offline Douglas Ames

  • 2014 Supporters
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1299
Re: leadouts
« Reply #5 on: March 24, 2012, 11:44:46 AM »
DuBro Kwik Twist - It performs a "Haywire twist" on solid leadouts. This what I intend to use on my current build.
Logged
AMA 656546

If you do a little bit every day it will get done, or you can do it tomorrow.

Offline Paul Allen

  • 2014 Supporters
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 392
Re: leadouts
« Reply #6 on: March 24, 2012, 01:00:32 PM »
OK found it,Stunt News Jan/Feb 2009.
Paul
Logged

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags:
 


Advertise Here