News:


  • July 24, 2025, 09:47:33 PM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: lead out lines pull test  (Read 907 times)

Offline raby fink

  • Trade Count: (0)
  • Ensign
  • **
  • Posts: 31
lead out lines pull test
« on: March 12, 2009, 10:01:18 AM »
I bought two 30 pound test cables for lead out lines yesterday for my Akromaster. I am wondering if that will be strong enough. It is going to be powered by an OS15LA. Please let me know
Thanks
Raby
Logged

Offline Clint Ormosen

  • 2019 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2632
Re: lead out lines pull test
« Reply #1 on: March 12, 2009, 09:46:35 PM »
I like to overkill the leadout line strength, but you should be OK with 30lb test on a .15
Logged
-Clint-

AMA 559593
Finding new and innovated ways to screw up the pattern since 1993

Offline John Hammonds

  • 23 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 567
Re: lead out lines pull test
« Reply #2 on: March 13, 2009, 01:06:36 PM »
As (I assume) you are using a 2 line system, so 60LB in reality. I would say that's more than enough.

TTFN
snafu
Logged
I started out with nothing and still have most of it left.....
Fast, Cheap, Reliable - Choose any 2!
BMFA 165249

Offline phil myers

  • Trade Count: (0)
  • Commander
  • ****
  • Posts: 212
Re: lead out lines pull test
« Reply #3 on: March 13, 2009, 05:39:38 PM »
 Hi ^^ I,m building an Akromaster (finally decided on an 0.12 ASP engine) but I'm using 100lbs shark trace for the lead outs!! LL~ Oops, maybe I've overdone it a bit!
Phil
Logged

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags: