stunthanger.com

General control line discussion => Open Forum => Topic started by: raby fink on March 12, 2009, 10:01:18 AM

Title: lead out lines pull test
Post by: raby fink on March 12, 2009, 10:01:18 AM

I bought two 30 pound test cables for lead out lines yesterday for my Akromaster. I am wondering if that will be strong enough. It is going to be powered by an OS15LA. Please let me know
Thanks
Raby

Title: Re: lead out lines pull test
Post by: Clint Ormosen on March 12, 2009, 09:46:35 PM

I like to overkill the leadout line strength, but you should be OK with 30lb test on a .15

Title: Re: lead out lines pull test
Post by: John Hammonds on March 13, 2009, 01:06:36 PM

As (I assume) you are using a 2 line system, so 60LB in reality. I would say that's more than enough.

TTFN
snafu

Title: Re: lead out lines pull test
Post by: phil myers on March 13, 2009, 05:39:38 PM

 Hi ^^ I,m building an Akromaster (finally decided on an 0.12 ASP engine) but I'm using 100lbs shark trace for the lead outs!! LL~ Oops, maybe I've overdone it a bit!
Phil