News:



  • April 27, 2024, 02:21:34 PM

Login with username, password and session length

Author Topic: ...I tried...  (Read 2214 times)

Offline Bootlegger

  • 22 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2710
...I tried...
« on: March 11, 2009, 09:30:03 AM »
   The search engine for "clear plastic hose" such as is on the "chicken stick" but nuttin came up...  Any advice as to where to look next?  I need a size about 3/4" i.d. to make a chicken stick..
                                                  Thanks, Gil
8th Air Force Veteran
Gil Causey
AMA# 6964

Online RC Storick

  • Forum owner
  • Administrator
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12411
  • The finish starts with the first piece of wood cut
    • Stunt Hangar
Re: ...I tried...
« Reply #1 on: March 11, 2009, 09:34:28 AM »
Air conditioning shops
AMA 12366

Offline Glenn (Gravitywell) Reach

  • Gravitywell
  • 2016 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1391
Re: ...I tried...
« Reply #2 on: March 11, 2009, 09:35:06 AM »
Hi Bootlegger.....almost any hardware store sells the stuff.  As long as they sell plumbing supplies, they will likely have the hose.  Another is a farm supply store.  They use that type of hose for pumps and such. H^^
Glenn Reach
Westlock, Alberta
gravitywell2011 @ gmail . com

Offline Bill Hodges

  • AMA Member and supporter
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 349
Re: ...I tried...
« Reply #3 on: March 11, 2009, 09:48:14 AM »
I bought some for that very purpose at Ace Hardware.  It was on a roll in the plumbing section.  If memory serves, it was about a dollar for a foot of it.

Bill Hodges
Bill Hodges
AMA 12450

Offline George

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1468
  • Love people, Use things.
Re: ...I tried...
« Reply #4 on: March 11, 2009, 10:26:35 AM »
Neighbor's garden hose.  ;D

Plan B: I think I saw some at a "True Value" hardware store.

George
George Bain
AMA 23454

Offline Bob Reeves

  • 2016 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 3415
    • Somethin'Xtra Inc.
Re: ...I tried...
« Reply #5 on: March 11, 2009, 10:52:44 AM »
I've even seen it at the big box stores, Home Depot and Lowe's..

Offline Randy Ryan

  • AMA Member
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1767
Re: ...I tried...
« Reply #6 on: March 11, 2009, 10:56:23 AM »
Last resort

http://www.mcmaster.com/#5046k15/=yh2v8

You can really narrow it down by going through their selection process, this is just one quick shot.
Randy Ryan <><
AMA 8500
SAM 36 BO all my own M's

Online Matt Colan

  • N-756355
  • AMA Member
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 3452
Re: ...I tried...
« Reply #7 on: March 11, 2009, 11:39:44 AM »
Tower Hobbies has full chicken sticks.

Matt Colan

Offline bob branch

  • AMA Member
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 941
Re: ...I tried...
« Reply #8 on: March 11, 2009, 12:07:05 PM »
Boat supply stores will also have it.

bob branch

Offline Bootlegger

  • 22 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2710
Re: ...I tried...
« Reply #9 on: March 11, 2009, 12:42:37 PM »
      Thanks guy's found some at Ace Hdw. Again thanks for the help... #^
8th Air Force Veteran
Gil Causey
AMA# 6964

Offline Perry Rose

  • Go vote, it's so easy dead people do it all the time.
  • 2015
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1664
Re: ...I tried...
« Reply #10 on: March 11, 2009, 01:28:14 PM »
I just wrap some duct tape on my finger, where the cut's going to be, and start flipping. And I've used tuned pipe connector hose in a pinch.
I may be wrong but I doubt it.
I wouldn't take her to a dog fight even if she had a chance to win.
The worst part of growing old is remembering when you were young.

Offline Garf

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1817
    • Hangar Flying
Re: ...I tried...
« Reply #11 on: March 12, 2009, 10:41:49 AM »
Mine is made of air brake line from a bus, same as heavy trucks use.

Offline John Stiles

  • 2014 Supporters
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1928
  • one shot=one kill
Re: ...I tried...
« Reply #12 on: March 12, 2009, 05:48:02 PM »
I got a piece about 2' long....it's clear, 3/4 ID braided.....come on over I'll let ya have the whole hunk! H^^
John Stiles             Tulip, Ar.

Offline John Stiles

  • 2014 Supporters
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1928
  • one shot=one kill
Re: ...I tried...
« Reply #13 on: March 12, 2009, 05:57:00 PM »
Here it is: H^^
John Stiles             Tulip, Ar.


Advertise Here
Tags:
 


Advertise Here