Author Topic: Cutting foam wings (Read 953 times)

Paul Taylor · « **on:** June 10, 2009, 04:05:54 PM »

I have a lot of respect for the guys that cut foam wings. I have watched all kinds of videos on doing this. The guys make it look easy.

I have tried to cut two complete wings. One for a small sport plane and it did not turn out that great. Still stilling on the shelf. I got templates for a Tutor 2 wing. Tapper on the LE. I went thru a 15 inch block of foam and did not get one good pannel. I get to the LE and I am not sure because the outside template is way smaller I put a diviot in the LE. Dang-nab-it. Rasfrasen ^&#$%... Bleepity-Bleep!

But I will keep on trying till I get a good one.

sleepy gomez · « **Reply #1 on:** June 10, 2009, 10:29:26 PM »

Rootbeard, call me. 863-899-0656 SLEEPY

john e. holliday · « **Reply #2 on:** June 11, 2009, 06:58:39 AM »

Myself I start at leading edge and go towards the trailing edge. That is why I use what used to be cheap foam sheets from the local lumber yard. They are not cheap anymore or they see me coming. DOC Holliday

Paul Taylor · « **Reply #3 on:** June 11, 2009, 03:15:45 PM »

Sleepy tried to call and got Vmail. Will try again tomorrow.

Author Topic: Cutting foam wings (Read 953 times)

Paul Taylor

Cutting foam wings

sleepy gomez

Re: Cutting foam wings

john e. holliday

Re: Cutting foam wings

Paul Taylor

Re: Cutting foam wings