Head gasket for FP35

[rich gorrill]

I asked in engine tips but i'll ask here too.Are the head gaskets for the FP35 and the FP40 one in the same?  I kmow the bore of the 40 is slightly larger than the 35 by 1mm.  Tower Hobbies has the gasket set for the 40 but not the 35. All help appreciated.

Thanks, Rich

[bob whitney]

if u cant find any 35 HG's  give me the ID and OD and i will cut y a few for a couple of bucks

[rich gorrill]

Thanks bob i appreciate the offer. I'll let you know.

Rich

[Dennis Moritz]

Different gaskets.

[rich gorrill]

Thanks Dennis for clearing that up. Is there any matching engine gaskets that will fit or should I send the measruements to Bob and have a couple made.

Rich

[Wayne J. Buran]

Rich, I sent you a PM.
Wayne

[Akihiro Danjo]

Thunder Tiger PRO-36 head gasket can be used for FP35 though the backplate gasket does not fit.

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXAHXL&P=SM

Aki

[rich gorrill]

Thank you Aki, Wayne I didn't receive your PM. Maybe try again.

Rich

[rich gorrill]

Wayne, I received your e-mail false alarm.    Thanks