News:



  • May 10, 2024, 03:12:32 PM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: Need .46VF header  (Read 1076 times)

Offline Shorts,David

  • 21 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 622
Need .46VF header
« on: August 18, 2020, 10:09:41 AM »
Hi, Anyone have a header for a 46vf, preferably with at least a 1 inch rise. Randy doesn't have them anymore. I had it, I built the model, I removed it months ago when I was painting the model. And I'm starting to think I tossed it out just a couple weeks ago when I was cleaning in a hurry.

David
Logged

Offline Craig Beswick

  • 24 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 563
Re: Need .46VF header
« Reply #1 on: August 18, 2020, 02:50:00 PM »
David, PM sent.
Logged
AUS 87123
"The Ninja"

Offline Tim Stagg

  • 2017
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 454
Re: Need .46VF header
« Reply #2 on: August 27, 2020, 12:46:00 PM »
Craig, or anyone else,

Would you happen to have another? I just determined mine is only 3" and that is too short for my needs

Thanks

Tim Stagg
Logged
Tim Stagg

Offline Craig Beswick

  • 24 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 563
Re: Need .46VF header
« Reply #3 on: August 27, 2020, 04:08:50 PM »
David,
I have ordered the Mac Thrust Line header from Mecoa, part no' 3523.

I am not 100% certain if it will do what I want but if you can wait a few weeks I will let you know.

Craig.
Australia

Logged
AUS 87123
"The Ninja"

Offline Daniel_Munro

  • Trade Count: (0)
  • Commander
  • ****
  • Posts: 171
Re: Need .46VF header
« Reply #4 on: August 28, 2020, 06:02:05 AM »
Keen to hear if anyone find a source for these. I too am in need of one.
Logged
NZL7396

Offline ericrule

  • 2014 Supporters
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 330
Re: Need .46VF header
« Reply #5 on: August 28, 2020, 11:29:07 AM »
Try calling Jim Lee at Lee's Machine Shop. He may be able to help you.
Logged

Offline Shorts,David

  • 21 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 622
Re: Need .46VF header
« Reply #6 on: October 27, 2020, 05:03:09 PM »
Thanks to Craig for this info, but I got a macs header from Mecoa. It is the backwards rise from what we use, but flipped over with some grinding it fits and seals perfectly. I'd keep the info to myself in case I need another in the future, but, that'd just be rotten of me. I think it's the 3522 that is the upside down one I used.
Logged

Offline John Lindberg

  • 21 supporter
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 393
Re: Need .46VF header
« Reply #7 on: October 29, 2020, 01:55:11 PM »
You might try Dub Jett; he made me a rear exhaust header, not cheap, but at my age it will probably outlast me! D>K
Logged

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags:
 


Advertise Here