News:


  • July 18, 2025, 03:03:37 PM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: Foam Hot Wire Cutter. WANTED!  (Read 1962 times)

Offline Avaiojet

  • 22 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 7468
  • Just here for the fun of it also.
Foam Hot Wire Cutter. WANTED!
« on: June 28, 2017, 06:29:59 PM »
I'm looking to "borrow" a foam hot wire cutter. I'll pay shipping in both directions and I will return it.

Thanks in advance.

Charles
Logged
Trump Derangement Syndrome. TDS. 
Avaiojet Derangement Syndrome. ADS.
Amazing how ignorance can get in the way of the learning process.
If you're Trolled, you know you're doing something right.  Alpha Mike Foxtrot. "No one has ever made a difference by being like everyone else."  Marcus Cordeiro, The "Mark of Excellence," you will not be forgotten. "No amount of evidence will ever persuade an idiot."- Mark Twain. I look at the Forum as a place to contribute and make friends, some view it as a Realm where they could be King.   Proverb 11.9  "With his mouth the Godless destroys his neighbor..."  "Perhaps the greatest challenge in modeling is to build a competitive control line stunter that looks like a real airplane." David McCellan, 1980.

Offline Perry Rose

  • Go vote, it's so easy dead people do it all the time.
  • 2015
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1810
Re: Foam Hot Wire Cutter. WANTED!
« Reply #1 on: June 29, 2017, 08:11:36 AM »
If your looking for the home made, crude, basic but works foam cutter I may be able to help. The bow will easily cut a 45 inch core.
Logged
I may be wrong but I doubt it.
I wouldn't take her to a dog fight even if she had a chance to win.
The worst part of growing old is remembering when you were young.

Offline Avaiojet

  • 22 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 7468
  • Just here for the fun of it also.
Re: Foam Hot Wire Cutter. WANTED!
« Reply #2 on: June 29, 2017, 08:26:00 AM »
Quote from: Perry Rose on June 29, 2017, 08:11:36 AM
If your looking for the home made, crude, basic but works foam cutter I may be able to help. The bow will easily cut a 45 inch core.

MM,

Yes, I know one can easily be made. No interest in that.

Perry,

The wing is 24" each side. What do you have?

CB
Logged
Trump Derangement Syndrome. TDS. 
Avaiojet Derangement Syndrome. ADS.
Amazing how ignorance can get in the way of the learning process.
If you're Trolled, you know you're doing something right.  Alpha Mike Foxtrot. "No one has ever made a difference by being like everyone else."  Marcus Cordeiro, The "Mark of Excellence," you will not be forgotten. "No amount of evidence will ever persuade an idiot."- Mark Twain. I look at the Forum as a place to contribute and make friends, some view it as a Realm where they could be King.   Proverb 11.9  "With his mouth the Godless destroys his neighbor..."  "Perhaps the greatest challenge in modeling is to build a competitive control line stunter that looks like a real airplane." David McCellan, 1980.

Offline Perry Rose

  • Go vote, it's so easy dead people do it all the time.
  • 2015
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1810
Re: Foam Hot Wire Cutter. WANTED!
« Reply #3 on: June 29, 2017, 08:57:48 AM »
I sent 2 pictures to your avaiojet email. I couldn't find the cfc email. It will cut a 45 inch panel with ease.
Logged
I may be wrong but I doubt it.
I wouldn't take her to a dog fight even if she had a chance to win.
The worst part of growing old is remembering when you were young.

Offline Jim Carter

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 953
Re: Foam Hot Wire Cutter. WANTED!
« Reply #4 on: June 29, 2017, 10:30:58 AM »
Quote from: Avaiojet on June 28, 2017, 06:29:59 PM
I'm looking to "borrow" a foam hot wire cutter. I'll pay shipping in both directions and I will return it.

Thanks in advance.

Charles
You're welcome to use mine.  It ain't fancy but it works!  48" handle with an effective 44" cut ain't gonna be cheap to ship unless you wanna' come pick it up or pay for Greyhound which should be about $25 with everything packed and ready to use (jus' approximatin' / guessin' though)!
Logged

Offline Dan McEntee

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 7550
Re: Foam Hot Wire Cutter. WANTED!
« Reply #5 on: June 29, 2017, 09:10:19 PM »
Quote from: Avaiojet on June 29, 2017, 08:26:00 AM
MM,

Yes, I know one can easily be made. No interest in that.

Perry,

The wing is 24" each side. What do you have?

CB


      Why don't you just have some one cut what you want? it has to be cheaper than paying to ship a rig both ways, not to mention the foam you will waste getting through the learning curve, and the potential of damaging some one's equipment and then you have to replace it!!!!! Making your own rig suddenly sounds better!!!!???? Or just buying a few cores that you need and be done!!!?????

  Just sayin'!
  Dan McEntee
Logged
AMA 28784
EAA  1038824
AMA 480405 (American Motorcyclist Association)

Offline Bill Morell

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 956
Re: Foam Hot Wire Cutter. WANTED!
« Reply #6 on: June 30, 2017, 08:08:41 AM »
Quote from: Dan McEntee on June 29, 2017, 09:10:19 PM

      Why don't you just have some one cut what you want? it has to be cheaper than paying to ship a rig both ways, not to mention the foam you will waste getting through the learning curve, and the potential of damaging some one's equipment and then you have to replace it!!!!! Making your own rig suddenly sounds better!!!!???? Or just buying a few cores that you need and be done!!!?????

  Just sayin'!
  Dan McEntee

Dan, you know that this is Charles asking to borrow this so do not expect anything to be done in a logical manner.
Logged
Bill Morell
It wasn't that you could and others couldn't, its that you did and others didn't.
Vietnam 72-73
  Better to have it and not need it than it is to need it and not have it.

Offline john e. holliday

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 22995
Re: Foam Hot Wire Cutter. WANTED!
« Reply #7 on: June 30, 2017, 09:39:35 AM »
Oh you guys are in for it.  Are you two in a fight to make number one on the troll list? S?P   H^^
Logged
John E. "DOC" Holliday
10421 West 56th Terrace
Shawnee, KANSAS  66203
AMA 23530  Have fun as I have and I am still breaking a record.

Offline Bill Morell

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 956
Re: Foam Hot Wire Cutter. WANTED!
« Reply #8 on: June 30, 2017, 10:16:50 AM »
Quote from: john e. holliday on June 30, 2017, 09:39:35 AM
Oh you guys are in for it.  Are you two in a fight to make number one on the troll list? S?P   H^^

Been there for a long time. Just reconfirming my position!
Logged
Bill Morell
It wasn't that you could and others couldn't, its that you did and others didn't.
Vietnam 72-73
  Better to have it and not need it than it is to need it and not have it.

Offline Avaiojet

  • 22 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 7468
  • Just here for the fun of it also.
Re: Foam Hot Wire Cutter. WANTED!
« Reply #9 on: June 30, 2017, 07:00:44 PM »
 LL~ LL~ LL~

You guys are so correct.  ;D

Yes, shipping both ways is an issue and that cannot be done.

No learning curve, I've cut many foam wings. Like riding a bike or a horse you don't forget.  n~

I just have a few small 1/2 things to cut and I have just enough old foam.

I have an opportunity for a few small engines.

Thanks for the replies.

CB

Logged
Trump Derangement Syndrome. TDS. 
Avaiojet Derangement Syndrome. ADS.
Amazing how ignorance can get in the way of the learning process.
If you're Trolled, you know you're doing something right.  Alpha Mike Foxtrot. "No one has ever made a difference by being like everyone else."  Marcus Cordeiro, The "Mark of Excellence," you will not be forgotten. "No amount of evidence will ever persuade an idiot."- Mark Twain. I look at the Forum as a place to contribute and make friends, some view it as a Realm where they could be King.   Proverb 11.9  "With his mouth the Godless destroys his neighbor..."  "Perhaps the greatest challenge in modeling is to build a competitive control line stunter that looks like a real airplane." David McCellan, 1980.

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags: