News:



  • June 01, 2024, 09:33:14 AM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: Anyone have information on the McCoy Sportsman Jr 36? New pics  (Read 2190 times)

Offline Chris McMillin

  • 22 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1903
  • AMA 32529
Anyone have information on the McCoy Sportsman Jr 36? New pics
« on: July 22, 2007, 06:57:16 PM »
I just acquired an old Scientific Beechcraft with a McCoy 38 engine mounted.

It is a rear rotor type with a black head and an angled plug.

I have never seen this engine before, does any one know anything about them?

Thanks,
Chris...
« Last Edit: July 24, 2007, 10:32:05 PM by Chris McMillin »
Logged

Offline Chris McMillin

  • 22 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1903
  • AMA 32529
Re: Anyone have information on the McCoy 38?
« Reply #1 on: July 22, 2007, 07:55:08 PM »
That looks like the one, Ty.

This one is sleeve bearing, ringed piston, crankpin broken off, and the rotor is stuck. Special edition!

Anyone got a crank for a Sportsman 36?

Chris...

Logged

Offline Russell Shaffer

  • AMA Member
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1333
Re: Anyone have information on the McCoy 38?
« Reply #2 on: July 22, 2007, 09:08:40 PM »
I bet someone who really wanted to do the job could drill out the old crankpin and replace it.  A real machinist, not me.  If I did it the pin would be crooked, and that wouldn't last long. Or maybe you'll get lucky and a common crank will interchange. 
Logged
Russell Shaffer
Klamath Falls, Oregon
Just North of the California border

Offline rustler

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 719
Re: Anyone have information on the McCoy 38?
« Reply #3 on: July 23, 2007, 01:39:38 PM »
A lot of parts surprisingly interchange. If the stroke is the same, you may find an RV 29 shaft will fit. Of course, you've still got to find one!
Logged
Ian Russell.
[I can remember the schedule o.k., the problem is remembering what was the last manoeuvre I just flew!].

Offline Chris McMillin

  • 22 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1903
  • AMA 32529
Re: Anyone have information on the McCoy 38?
« Reply #4 on: July 23, 2007, 02:21:39 PM »
I'm trying a few guys I know of, Tom Lay, Mike Pratt, Frank Bowman, etc. I'll probably find one.

The web isn't complete around the back, so the pin and part of the web broke off, not so easy to fix this type of failure, it just needs a new or serviceable unit.

 I even found a CAD drawing of the outside view of the engine on the internet.

Thanks for your help, eveyone.

Chris...
Logged

Offline Louis Rankin

  • Trade Count: (0)
  • Commander
  • ****
  • Posts: 354
Re: Anyone have information on the McCoy 38?
« Reply #5 on: July 24, 2007, 08:50:40 AM »
Chris, I have a whole drawer full of McCoys.  I will look and see if I have what you need.
Logged
Louis Rankin
Somerville Tennessee
AMA 10859

Offline Garf

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1817
    • Hangar Flying
Re: Anyone have information on the McCoy 38?
« Reply #6 on: July 24, 2007, 10:37:27 AM »
Is this it?
Logged

Offline Chris McMillin

  • 22 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1903
  • AMA 32529
Re: Anyone have information on the McCoy 38?
« Reply #7 on: July 24, 2007, 05:33:31 PM »
Yes Phil,

That is it! This one I have has a sleeve bearing. They came both ways. Also has a keyed output shaft.

Here are some pics of it and the crank to clarify.

Louis, thanks for looking.

Chris...
« Last Edit: July 24, 2007, 10:36:34 PM by Chris McMillin »
Logged

Offline Chris McMillin

  • 22 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1903
  • AMA 32529
Re: Anyone have information on the McCoy Sportsman Jr 36? New pics
« Reply #8 on: July 24, 2007, 10:33:24 PM »
Here is the cute little "big" Scientific Beechcraft it came in.
Chris...
Logged

Offline Chris McMillin

  • 22 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1903
  • AMA 32529
Re: Anyone have information on the McCoy 38?
« Reply #9 on: July 30, 2007, 12:05:46 AM »
Quote from: Chris McMillin on July 24, 2007, 05:33:31 PM
Yes Phil,

That is it! This one I have has a sleeve bearing. They came both ways. Also has a keyed output shaft.

Here are some pics of it and the crank to clarify.

Louis, thanks for looking.

Chris...



Hi guys,

I just installed a new crank and the old McCoy is ready to run. Thanks for the help everyone!
Chris...
Logged

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags:
 


Advertise Here