As everyone probably knows by now, CC no longer offers the Ice Lite ESC's. Their latest and greatest is now called the Edge. I just got one to go along with my E Flite 32 that I installed in my SV-11.
Here are my settings, please let me know if anything looks out of place:
Vehicle Type :Control line
Throttle Type: Governor mode
Governor: High
Governor Gain: Medium (25)
Initial Spool up Rate High 8
Head Speed Change Rate High 8
Battery Pack Voltage 18.5
No gearing/Direct Drive
kV of motor 770
Magnetic Poles in motor (14)
Desired Head Speeds (Set with my Hubin FM-9) Will reprogram once I see what my lap times are
Brake Strength 100% (Hard)
Brake delay 0.6
Brake ramp Medium
Cutoff voltage (Auto Lipo)
Auto Lipo volts per cell (3.2)
Voltage cut off/type: Hard cutoff
Current limiting (Very sensitive 75A)
Current Cut off type: Hard cutoff
Motor start power: Medium (59)
Motor timing: Custom 4
Direction: Reverse
PWM Rate 8
Power on Beep: Enabled
BEC Voltage: 5.0V
Link Live Enable: Disabled
Auxiliary Wire Mode: Disabled
Data Logging: 2/sec Battery voltage, currrent, controller temp/ throttle, motor RPM
Take care and thanks.
Vince