Author Topic: Wristpin pads for McCoy 40 (Read 500 times)

Jim Kraft · « **on:** October 04, 2007, 02:01:54 PM »

Does anyone make the teflon end pads for McCoy 40 R/H wristpins? I think these were only used on some of the later ones. I have an earlier one that has brass eyelets.

Marvin Denny · « **Reply #1 on:** October 04, 2007, 05:07:00 PM »

Scott Riese. I believe he is out of commission at the present time. Do you need some? I have a couple of extras.

Bigiron

Jim Kraft · « **Reply #2 on:** October 04, 2007, 06:21:39 PM »

I need 1 Marvin. I did a dumb thing and lapped the piston in with the pads in the pin. I use the wristpin in my fixture ( clothespin ) and lapped the end right off that little bugger. The other one is fine. Live and learn.

Tom Dugan · « **Reply #3 on:** October 05, 2007, 09:27:02 AM »

I have purchased teflon pads alone from MECOA for my K&B 61. I was just at their website and see that they list a part number for the pads alone pn: 26-4001. You might give them a try to see if what they have will adapt WWW.MECOA.COM in parts department, go to the exploded views, or you can call them directly.

Tom

Jim Kraft · « **Reply #4 on:** October 05, 2007, 01:51:30 PM »

Thanks Tom; I had forgotten about MECOA. They might have the ones for the McCoy also, as I believe they have the latest Testors McCoy engines. Thanks again for the reminder.

Author Topic: Wristpin pads for McCoy 40 (Read 500 times)

Jim Kraft

Wristpin pads for McCoy 40

Marvin Denny

Re: Wristpin pads for McCoy 40

Jim Kraft

Re: Wristpin pads for McCoy 40

Tom Dugan

Re: Wristpin pads for McCoy 40

Jim Kraft

Re: Wristpin pads for McCoy 40