Author Topic: Enya .29 5224 prop size (Read 1972 times)

Ron Cribbs · « **on:** July 15, 2015, 09:03:05 PM »

Hey guys,

I have an old Bi-slob that was given to me that has an Enya .29 on the nose.

I have stared at it long enough now and I am going to fly this thing. I ran it with an MA 10x6, but was wondering if that is the best choice. Seems a little down on power to have this thing hanging on the prop.

Ron

Bill Little · « **Reply #1 on:** July 16, 2015, 07:49:57 PM »

Hi Ron,

I have some 9 1/2 X 6 petal blade George Aldrich props that I use on my .29s. So far they have been a pretty good choice for all of my .29s. I would try trimming the 10 X ^ to a 9 3/4" first and then 9 1/2". The MAS props are pretty cheap and you will get a good look at how prop diameter affects the model.

BIG Bear
RNMM/AMM

Ron Cribbs · « **Reply #2 on:** July 18, 2015, 10:16:51 PM »

Thanks Bill, I appreciate the info!

Tim Wescott · « **Reply #3 on:** July 18, 2015, 11:35:28 PM »

Or try a 10x5, and needle it to run a bit faster. Bi Slobs need such an odd engine run I'm not sure if it'll do but -- try it.

Balsa Butcher · « **Reply #4 on:** July 19, 2015, 04:32:54 PM »

I used to run one in an All American Sr. for OTS. 9X6 Topflite worked well. Needed the short prop smaller diameter prop because of ground clearance issues.

Author Topic: Enya .29 5224 prop size (Read 1972 times)

Ron Cribbs

Enya .29 5224 prop size

Bill Little

Re: Enya .29 5224 prop size

Ron Cribbs

Re: Enya .29 5224 prop size

Tim Wescott

Re: Enya .29 5224 prop size

Balsa Butcher

Re: Enya .29 5224 prop size